I have set the timeout to 6000 and it is still giving me a 'timed out' status.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christopher L. Sweeney Sent: Thursday, August 28, 2003 8:58 AM To: InterMapper Discussion At 12:13 PM -0600 8/27/03, Mike Lieberman wrote: >We had gotten our temp probe working under the previous beta of IM. We >simply upgraded to the newest beta in our Debian box and the temp probe >is via IM reporting "Down" the "Reason:Command timed out" > >>From the Debian box we manually checked the probe with the exact >>command >from IM (I know because I copied and pasted the command to make sure. >Manually the command still works. > >NS1:/home/mike/InterMapper_Settings/Tools# ./check_temptraxe -H >216.169.4.18 -p 1 -w 80 -c 90 Temp Warning: Room1 Rack Temp = 80.9 F > I've found the problem (confusion about the units of time being compared) and this will be fixed in 4.1.1 final. As a workaround, you can set the timeout for the device very high (specifically, 60 times what you would ordinarily want it to be). This only applies to devices using command-line probes. -- Christopher -- ================================================ Christopher L. Sweeney [EMAIL PROTECTED] http://www.dartware.com/ ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
