I manually changed the timeout to 10 sec's and the condition continues.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christopher L. Sweeney Sent: Wednesday, August 27, 2003 2:50 PM To: InterMapper Discussion At 12:42 PM -0600 8/27/03, Mike Lieberman wrote: >It takes less than a second when done manually. Thanks. I think the default timeout right now is three seconds, which should be enough, then, but it's possible that it's taking too long to setup the command line shell and/or to notice that the probe has completed. In any case, I'll make it more forgiving and see if that takes care of the problem. -- Christopher > > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Christopher L. >Sweeney >Sent: Wednesday, August 27, 2003 12:21 PM >To: InterMapper Discussion > >At 12:13 PM -0600 8/27/03, Mike Lieberman wrote: >>We had gotten our temp probe working under the previous beta of IM. We >>simply upgraded to the newest beta in our Debian box and the temp >>probe is via IM reporting "Down" the "Reason:Command timed out" >> >>>From the Debian box we manually checked the probe with the exact >>>command >>from IM (I know because I copied and pasted the command to make sure. >>Manually the command still works. >> >>NS1:/home/mike/InterMapper_Settings/Tools# ./check_temptraxe -H >>216.169.4.18 -p 1 -w 80 -c 90 Temp Warning: Room1 Rack Temp = 80.9 F > >4.1.1b4 will time out command-line probes that take too long, just as >previous versions time out other probes that take too long. Sounds like >we need to be more forgiving and allow more time for command-line >probes. I'll be more generous for the release version. > >How long would you say it takes for your probe to complete when it >completes successfully from the command line? > >-- Christopher > >-- >================================================ >Christopher L. Sweeney >[EMAIL PROTECTED] >http://www.dartware.com/ > >____________________________________________________________________ >List archives: >http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ >To unsubscribe: send email to: [EMAIL PROTECTED] > > >____________________________________________________________________ >List archives: >http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ >To unsubscribe: send email to: [EMAIL PROTECTED] -- ================================================ Christopher L. Sweeney [EMAIL PROTECTED] http://www.dartware.com/ ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
