On Monday 18 December 2006 13:31, Gregor Fuis wrote:
> Helo,
>
> Now I tried kernel 2.6.18 and it works with vlc, but i didn't try it
> with SECAM, becouse i am not there right now. But I have a problem
> with VLC not setting bit rate, max bit rate and bit rate mode. I thik
> it is to much 6Mb to 8Mb.
>
> How can I change that to lower bit rates?
Run v4l2-ctl -L to see the list of mpeg controls. Use -c to set them.
>
> And why now ivtv-detect don't list mpeg encoding devices? This was
> really useful for me!
They now appear in the kernel log when the module is loaded. ivtv-detect
is no longer supported.
Hans
>
> Best Regards,
>
> Gregor Fuis
>
> Hans Verkuil wrote:
> > On Friday 15 December 2006 15:07, Gregor Fuis wrote:
> >> Hello,
> >>
> >> I have two cards, with 'ivtv_std=3' i managed to get sound on
> >> first cards. Can i configure card two with thist option
> >> 'ivtv_std=3,3'
> >
> > No, it should be a global option. Please give the full INIT IVTV
> > output when you load the driver with the ivtv_std=3 option.
> >
> > Hans
> >
> >> Thanks
> >>
> >> Hans Verkuil wrote:
> >>> On Friday 15 December 2006 10:27, Gregor Fuis wrote:
> >>>> Hello,
> >>>>
> >>>> I have a problem with Secam standard on my PVR 350 cards.
> >>>> Picture is ok but i don't have any sound. I know that the format
> >>>> i am receiving is Secam G and i know that PVR 350 works ok with
> >>>> secam L. Diference in these two scams is SOund Carrier (Secam G
> >>>> = 5.5MHz , Secam L = 6.5MHz).
> >>>
> >>> You can try adding the module option 'ivtv_std=3' for the ivtv
> >>> module in /etc/modprobe.conf. That forces secam.
> >>>
> >>> If that doesn't work, then you have to upgrade to a newer kernel
> >>> (2.6.18 or higher). I'm pretty sure VLC works with later kernels
> >>> too. Any VLC users out there who can confirm this?
> >>>
> >>> Regards,
> >>>
> >>> Hans
> >>>
> >>>> I am using ivtv driver 0.4.6 with kernel 2.6.12. I can't use
> >>>> kernels 2.6.16 and higher becouse i am using VLC to stream
> >>>> channels on my STB. And VLC doesn't have V4L2 module for now.
> >>>>
> >>>> IVTV detect log:
> >>>>
> >>>> [4433624.327000] ivtv: ==================== START INIT IVTV
> >>>> ====================
> >>>> [4433624.327000] ivtv: version 0.4.6 (tagged release) loading
> >>>> [4433624.327000] ivtv: Linux version: 2.6.15.7-ubuntu1-iskratel
> >>>> 686 gcc-4.0 [4433624.327000] ivtv: In case of problems please
> >>>> include the debug info between
> >>>> [4433624.327000] ivtv: the START INIT IVTV and END INIT IVTV
> >>>> lines, along with
> >>>> [4433624.327000] ivtv: any module options, when mailing the
> >>>> ivtv-users mailinglist.
> >>>> [4433624.332000] ivtv0: Autodetected WinTV PVR 350 card (cx23415
> >>>> based) [4433624.333000] ACPI: PCI Interrupt 0000:01:03.0[A] ->
> >>>> GSI 16 (level, low) -> IRQ 17
> >>>> [4433624.333000] ivtv0: Unreasonably low latency timer, setting
> >>>> to 64 (was 16)
> >>>> [4433624.389000] tveeprom: ivtv version
> >>>> [4433624.389000] tveeprom: Hauppauge: model = 48139, rev = K2B7,
> >>>> serial# = 8612420
> >>>> [4433624.389000] tveeprom: tuner = Philips FM1216ME MK5 (idx =
> >>>> 117, type = 4)
> >>>> [4433624.389000] tveeprom: tuner fmt = PAL(B/G) PAL(I)
> >>>> SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
> >>>> [4433624.389000] tveeprom: audio processor = MSP4418 (type = 19)
> >>>> [4433624.389000] tveeprom: decoder processor = SAA7115 (type =
> >>>> 13) [4433624.389000] ivtv0: i2c attach to card #0 ok
> >>>> [client=tveeprom, addr=50] [4433624.410000] tuner (ivtv): chip
> >>>> found at addr 0xc2 i2c-bus ivtv i2c driver #0
> >>>> [4433624.410000] ivtv0: i2c attach to card #0 ok [client=(tuner
> >>>> unset), addr=61]
> >>>> [4433624.615000] saa7115 2-0021: ivtv driver
> >>>> [4433624.615000] saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c
> >>>> driver #0) [4433624.779000] ivtv0: i2c attach to card #0 ok
> >>>> [client=saa7115, addr=21] [4433624.843000] saa7127 2-0044: ivtv
> >>>> driver
> >>>> [4433624.846000] saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c
> >>>> driver #0) [4433624.849000] ivtv0: i2c attach to card #0 ok
> >>>> [client=saa7127, addr=44] [4433624.871000] msp3400 2-0040: ivtv
> >>>> driver
> >>>> [4433624.871000] msp3400 2-0040: chip=MSP4418G-B3 +nicam +simple
> >>>> +simpler +radio mode=simpler
> >>>> [4433624.878000] ivtv0: i2c attach to card #0 ok
> >>>> [client=MSP4418G-B3, addr=40]
> >>>> [4433624.878000] msp3400 2-0040: msp34xxg daemon started
> >>>> [4433624.897000] tda9887 2-0043: (ivtv) chip found @ 0x86 (ivtv
> >>>> i2c driver #0)
> >>>> [4433624.897000] ivtv0: i2c attach to card #0 ok
> >>>> [client=tda9887, addr=43] [4433625.332000] ivtv0: loaded
> >>>> v4l-cx2341x-enc.fw firmware (262144 bytes) [4433625.443000]
> >>>> ivtv0: loaded
> >>>> v4l-cx2341x-dec.fw firmware (262144 bytes) [4433625.499000]
> >>>> ivtv0: Encoder revision: 0x02050032
> >>>> [4433625.501000] ivtv0: Decoder revision: 0x02020023
> >>>> [4433625.502000] ivtv0: Allocate DMA encoder MPEG stream: 128 x
> >>>> 32768 buffers (4096KB total)
> >>>> [4433625.503000] ivtv0: Allocate DMA encoder YUV stream: 161 x
> >>>> 12960 buffers (2048KB total)
> >>>> [4433625.505000] ivtv0: Allocate DMA encoder VBI stream: 80 x
> >>>> 26208 buffers (2048KB total)
> >>>> [4433625.506000] ivtv0: Allocate DMA encoder PCM audio stream:
> >>>> 455 x 4608 buffers (2048KB total)
> >>>> [4433625.508000] ivtv0: Create encoder radio stream
> >>>> [4433625.509000] ivtv0: Allocate DMA decoder MPEG stream: 16 x
> >>>> 65536 buffers (1024KB total)
> >>>> [4433625.510000] ivtv0: Allocate DMA decoder VBI stream: 512 x
> >>>> 2048 buffers (1024KB total)
> >>>> [4433625.511000] ivtv0: Create decoder VOUT stream
> >>>> [4433625.513000] ivtv0: Allocate DMA decoder YUV stream: 20 x
> >>>> 51840 buffers (1024KB total)
> >>>> [4433625.606000] ivtv0: loaded v4l-cx2341x-init.mpg firmware
> >>>> (155648 bytes) [4433625.633000] tuner: type set to 38 (Philips
> >>>> PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0
> >>>> [4433625.823000] ivtv0: Initialized WinTV PVR 350, card #0
> >>>>
> >>>>
> >>>> ivtvctl -d /dev/video0 -I --log-status
> >>>>
> >>>> SAA7115 reg[STATUS#1 - 0x1E] = 83
> >>>> Color Standard (D0-D1): SECAM
> >>>> White peak loop (D2): Not activated
> >>>> Gain value for act.lum. (min) (D3): Not limited
> >>>> Gain value for act.lum. (max) (D4): Not limited
> >>>> WIPA-mode slow-time constant (D5): Not activated
> >>>> Horizontal frequency (D6): Locked
> >>>> Field length (D7): Standard
> >>>>
> >>>> SAA7115 reg[STATUS#2 - 0x1F] = 91
> >>>> Ready for capture (D0): Yes
> >>>> Macrovision 7.01 (D1): No
> >>>> MV Colorstripe burst (D2): No
> >>>> MV Colorstripe burst type 3 (D3): No
> >>>> Input signal timebase (D4): Stable (broadcast/DVD)
> >>>> Field frequency (D5): 50Hz
> >>>> H & V loops (D6): Locked
> >>>> Interlace (D7): Detected
> >>>> ioctl VIDIOC_LOG_STATUS ok
> >>>> [4306273.339000] ivtv0: ================= START STATUS CARD
> >>>> #0 =================
> >>>> [4306273.339000] saa7115 0-0021: Audio frequency: 48 kHz
> >>>> [4306273.341000] saa7115 0-0021: Video signal:
> >>>> broadcast/DVD [4306273.341000] saa7115 0-0021: Frequency:
> >>>> 50Hz [4306273.341000] saa7115 0-0021: Detected format: SECAM
> >>>> [4306273.341000] saa7127 0-0044: Standard: 50 Hz
> >>>> [4306273.341000] saa7127 0-0044: Input: normal
> >>>> [4306273.341000] saa7127 0-0044: Output: S-Video +
> >>>> Composite [4306273.341000] saa7127 0-0044: WSS: disabled
> >>>> [4306273.341000] saa7127 0-0044: VPS: disabled
> >>>> [4306273.341000] saa7127 0-0044: CC: disabled
> >>>> [4306273.341000] tda9887 0-0043: Data bytes: b=94 c=70 e=09
> >>>> [4306273.341000] ivtv0: ================== END STATUS CARD
> >>>> #0 ==================
> >>>>
> >>>>
> >>>> If someone know solution for this please help me?
> >>>>
> >>>> Thanks,
> >>>>
> >>>> Gregor Fuis
> >>>>
> >>>> _______________________________________________
> >>>> ivtv-devel mailing list
> >>>> [email protected]
> >>>> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
> >>>
> >>> _______________________________________________
> >>> ivtv-devel mailing list
> >>> [email protected]
> >>> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
> >>
> >> _______________________________________________
> >> ivtv-devel mailing list
> >> [email protected]
> >> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
> >
> > _______________________________________________
> > ivtv-devel mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-devel
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
