I guess you are trying to do this for perfomance with mplayer. I would suggest the best aproach now would be to try the latest 0.3.6 ivtv driver. Use the latest (0.10.4) xdriver and the use the Xv driver to display mplayer output instead of sending it to /dev/video32 directly.
I can't think of anything that you are doing that would cause /dev/video0 to become broken though. All the register tweaking we do for playback affects just playback not grabbing of data from /dev/video0. John --- Matthias Laur <[EMAIL PROTECTED]> wrote: > Hello, > > I have some problems to use "mpeg" after "raw > video". I have installed the > 0.2 stable driver and use mplayer on /dev/video32 > with some instructions to > see live video that comes from a videocamera on > s-video in. It works very > fine, but when I use /dev/video0 after then for > recording the picture has > errors sometimes. After reboot the mpeg on > /dev/video0 is ok. I have still > found in the archive to this list that it has > something to do with the > registers and some patch should be help. But I'm > confused. Please tell me > which driver should I use, which patch and what > should I do with the patch. > > > > Regards, > > Matthias > > ------------------------------------------------------- This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
