Am Mon, 12 Feb 2018 14:38:29 +0530 schrieb bharat gohil <ghl.b...@gmail.com>:
> Hi Jan, > > I had modified root cell configuration as per your suggestion. > I got following error, > > Adding virtual PCI device 00:00.0 to cell "XXXXX" > /media/bgohil/data_ssd/virtualization/jailhouse/hypervisor/ivshmem.c:330: > returning error -EINVAL > JAILHOUSE_ENABLE: Invalid argument You specified 7 memory regions and the array just has 6 entries, you most likely even got a compiler warning about that. Now your index 6 is out of the array, have a look at hypervisor/ivshmem.c:330. Henning > Please find attached cell configuration file > Thanks, > Bharat > > On Mon, Feb 12, 2018 at 12:35 PM, Jan Kiszka <jan.kis...@web.de> > wrote: > > > On 2018-02-12 05:53, bharat gohil wrote: > > > Hello Jan, > > > > > > Please find attached root cell config file. > > > > > /* > > > * Jailhouse, a Linux-based partitioning hypervisor > > > * > > > * Test configuration for XXXXX (2-Cortex-A72, 4-Cortex-A35, 2GB > > > RAM) * > > > * Copyright (c) Siemens AG, 2014-2016 > > > * > > > * Authors: > > > * Jan Kiszka <jan.kis...@siemens.com> > > > * > > > * This work is licensed under the terms of the GNU GPL, version > > > 2. See > > > * the COPYING file in the top-level directory. > > > */ > > > > > > #include <jailhouse/types.h> > > > #include <jailhouse/cell-config.h> > > > > > > #define ARRAY_SIZE(a) sizeof(a) / sizeof(a[0]) > > > > > > struct { > > > struct jailhouse_system header; > > > __u64 cpus[1]; > > > struct jailhouse_memory mem_regions[8]; > > > > You are preparing for 8 regions here, but only 6 are initialized > > below. First thing to fix. > > > > > struct jailhouse_irqchip irqchips[1]; > > > struct jailhouse_pci_device pci_devices[1]; > > > } __attribute__((packed)) config = { > > > .header = { > > > .signature = JAILHOUSE_SYSTEM_SIGNATURE, > > > .revision = JAILHOUSE_CONFIG_REVISION, > > > .hypervisor_memory = { > > > .phys_start = 0x7C000000, > > > .size = 0x4000000, > > > }, > > > .debug_console = { > > > .address = 0x11002000, > > > .size = 0x1000, > > > .flags = JAILHOUSE_CON1_TYPE_8250 | > > > JAILHOUSE_CON1_ACCESS_MMIO | > > > JAILHOUSE_CON1_REGDIST_4 | > > > JAILHOUSE_CON2_TYPE_ROOTPAGE, > > > }, > > > .platform_info = { > > > .pci_mmconfig_base = 0x2000000, > > > .pci_mmconfig_end_bus = 0, > > > .pci_is_virtual = 1, > > > .arm = { > > > .gic_version = 2, > > > .gicd_base = 0x10510000, > > > .gicc_base = 0x10520000, > > > .gich_base = 0x10540000, > > > .gicv_base = 0x10560000, > > > .maintenance_irq = 25, > > > }, > > > }, > > > .root_cell = { > > > .name = "XXXXX", > > > > > > .cpu_set_size = sizeof(config.cpus), > > > .num_memory_regions = > > ARRAY_SIZE(config.mem_regions), > > > .num_irqchips = ARRAY_SIZE(config.irqchips), > > > .num_pci_devices = > > > ARRAY_SIZE(config.pci_devices), > > > > > > .vpci_irq_base = 108, > > > }, > > > }, > > > > > > .cpus = { > > > 0x3F, > > > }, > > > > > > .mem_regions = { > > > /* CCU */ { > > > .phys_start = 0x10000000, > > > .virt_start = 0x10000000, > > > .size = 0x2000000, > > > .flags = JAILHOUSE_MEM_READ | > > JAILHOUSE_MEM_WRITE | > > > JAILHOUSE_MEM_IO | > > > JAILHOUSE_MEM_IO_32, }, > > > /* MMIO 1 (permissive) */ { > > > .phys_start = 0x13000000, > > > .virt_start = 0x13000000, > > > .size = 0x4000000, > > > .flags = JAILHOUSE_MEM_READ | > > > JAILHOUSE_MEM_WRITE | JAILHOUSE_MEM_IO, > > > }, > > > /* pinctrl PA */ { > > > .phys_start = 0x18000000, > > > .virt_start = 0x18000000, > > > .size = 0x2000000, > > > .flags = JAILHOUSE_MEM_READ | > > > JAILHOUSE_MEM_WRITE | JAILHOUSE_MEM_IO | JAILHOUSE_MEM_IO_32, > > > }, > > > /* RAM */ { > > > .phys_start = 0x40000000, > > > .virt_start = 0x40000000, > > > .size = 0x02FFFFFF, > > > > This switches the region in to sub-page mode, and that may cause > > this surprising behavior. Just do size + 1, as it is correct. > > > > > .flags = JAILHOUSE_MEM_READ | > > > JAILHOUSE_MEM_WRITE > > | JAILHOUSE_MEM_EXECUTE, > > > }, > > > /* RAM*/ /*{ > > > .phys_start = 0x40EC0000, > > > .virt_start = 0x40EC0000, > > > .size = 0x0213FFFF, > > > .flags = JAILHOUSE_MEM_READ | > > JAILHOUSE_MEM_WRITE | JAILHOUSE_MEM_EXECUTE, > > > },*/ > > > /**THIS HOLE FOR ARM TRUSTED FIRMWARE**/ > > > > > > /* RAM*/ { > > > .phys_start = 0x43040000, > > > .virt_start = 0x43040000, > > > .size = 0x38EC0000, > > > .flags = JAILHOUSE_MEM_READ | > > JAILHOUSE_MEM_WRITE | JAILHOUSE_MEM_EXECUTE, > > > }, > > > > > > /* IVSHMEM shared memory region */ { > > > .phys_start = 0x7BF00000, > > > .virt_start = 0x7BF00000, > > > .size = 0x100000, > > > .flags = JAILHOUSE_MEM_READ | > > > JAILHOUSE_MEM_WRITE, }, > > > }, > > > > > > .irqchips = { > > > /* GIC */ { > > > .address = 0x10510000, > > > .pin_base = 32, > > > .pin_bitmap = { > > > 0xffffffff, 0xffffffff, > > > 0xffffffff, > > 0xffffffff > > > }, > > > }, > > > }, > > > > > > .pci_devices = { > > > { > > > .type = JAILHOUSE_PCI_TYPE_IVSHMEM, > > > .bdf = 0x00, > > > .bar_mask = { > > > 0xffffff00, 0xffffffff, 0x00000000, > > > 0x00000000, 0x00000000, 0x00000000, > > > }, > > > .shmem_region = 7, > > > > Keep this up-to-date when disabling a region. Should be 6 now. > > > > > .shmem_protocol = > > > JAILHOUSE_SHMEM_PROTO_VETH, }, > > > }, > > > }; > > > > > > > Jan > > > > > -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to jailhouse-dev+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.