Hi Vasi, 2010/7/6 funlw65 <[email protected]>
> Try to make directly an Arduino Clone. It is a chance to make it > compatible at hardware level regarding to I2C and SPI. The second SPI > can have mappable pins (but not his I2C companion), so, use I2C from > the first MSSP as Arduino I2C (identical pinout) and SPI from the > second MSSP as Arduino SPI (identical pinout) and you will have a > board compatible at hardware level, not just software level, as is the > case with FreeJALduino. I know because I studied the "problem" but I > got scared by the FTDI requirement. This is why I'm waiting for a > better version of 18F2550... if ever... > I don't know what you precisely mean about I²C and SPI, but I have in mind to map both, as both are present on different pins on Arduino 2009. Maybe that's what you mean in your next message ? Cheers, Seb -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
