Hi Rob, I had a look at this guilty sample. ADC lib can't find how to setup Vref. 18f14k50 uses PVCFG and NVCFG bits for this, but it expects ADCON1_PVCFG0 and ADCON1_PVCFG1 (bit by bit), whereas 18f14k50.jal only offers a bit*2 ADCON1_PVCFG (same for NVCFG).
grep showed only *k22 and *k50 have these PVCFG and NVCFG registers. All *k22 chips already have bit PVCFG0 and bit PVCFG1 bit, not just bit*2 PVCFG. Does it sound good to you to normalized these device files, including them also for k50 chips ? Cheers, Seb 2011/2/22 Rob Hamerling <[email protected]> > > Hi Seb, > > > On 2011/02/21 21:20, Sebastien Lelong wrote: > > Buildbot is up again, you may want to have a look at last weekly bee >> packages, as they're quite close to 0.7.0 content, as defined by now. >> >> I can generate beta packages as needed. Let me know. >> > > Good that Buildbot is alive again! > > In the latest bee package the sample earlier reported as having a problem > (18f14k50-adc-independent.jal) is still giving the same problem. In my > opinion either the ADC library should be fixed or this sample should be > removed from TORELEASE. > > I've not checked every detail but the rest of the package looks OK to me. > > > Regards, Rob. > > -- > R. Hamerling, Netherlands --- http://www.robh.nl > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > > -- Sébastien Lelong http://www.sirloon.net http://sirbot.org -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
