Hello,
Some Braille devices like the PowerBraille40, can be connected
to the parallel, printer port.
I don't know about the Braille Lite.
Search your manuals.
Harry
----- Original Message -----
From: Muhammad Fazil <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 13, 1999 2:38 PM
Subject: Re: Long awaited Braille Lite2000 arrived to add to jfw33!
hi Carroll,
Do you have any idea about the 4 disks that came with my Braille Lite2000?
Should I install the software that might be in 1 of these disks, prior to
attempting re-installation of jaws? Is there a way of getting around of
attaching Braille lie to the PC, when you have just 1 serial-port on your
computer and which is already occupied?
----- Original Message -----
From: Carol Pearson <[EMAIL PROTECTED]>
To: Teresa Cochran <[EMAIL PROTECTED]>; Olga Espinola
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Monday, September 13, 1999 6:54 AM
Subject: Re: Long awaited Braille Lite2000 arrived to add to jfw33!
> Theresa is right here. All works fine doing it the way she suggests and
> means that, if your BLT is connected at boot up, you will get Braille
> straight away without having to change the Braille settings.
>
> Les, in a previous message on this thread, you suggested it was not
> necessary to re-install JAWS. In my experience, it is definitely
necessary
> because, if you just alter the JFW.INI file, you have no Braille tables
> installed. Therefore, it is necessary, with the first Braille display you
> install, that you re-install JAWS.
>
> Before you install, you should have the BLT attached and turned on. Use
> the AR+P on the BLT to go into the relevant Speech Box mode. When you
have
> finished with the BLT in that mode or wish to go to local mode, use AR+P
> again.
>
> Hope this helps.
>
>
> --
> Carol Pearson
> [EMAIL PROTECTED]
>
>
>
>
> At 17:10 11/09/99 -0700, Teresa Cochran wrote:
> > Hi all,
> > I use the BLT40 as the default Braille display. Then, when I know
it's
> >installed and working, I go into the default config manager, Braille
> >options, and uncheck the "show Braille error" box. That way, if my unit
is
> >not attached when I boot up, the error doesn't appear, and things work
fine.
> >Teresa
> >
> >
> >-
> >Visit the jfw ml web page: http://jfw.cjb.net
> >
>
> -
> Visit the jfw ml web page: http://jfw.cjb.net
>
-
Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
