Hi there,
Sorry, you're losing me now. That setup sounds rather hairy!
--
Carol
[EMAIL PROTECTED]
At 09:22 14/09/99 -0700, Muhammad Fazil wrote:
>hi carrol,
>Now another question, since I don't have more than 1 serial port in my
>computer, and the one which is there is taken by my scanner. the scanner in
>turn, has a serial port which I plan to hook up the printer to. the
>printer, I guess, will have a serial port, can I attach myBLT to the serial
>port in printer?
>----- Original Message -----
>From: Carol Pearson <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
>Sent: Monday, September 13, 1999 3:21 PM
>Subject: Re: Long awaited Braille Lite2000 arrived to add to jfw33!
>
>
>> Hi Muhammad,
>>
>> First of all, I must apologise for an error in my last post. Teresa
>gently
>> woke me up with the reminder that I should have been saying
>> AR-CHORD+P-CHORD and not AR+P in my previous post. Sorry! I just do it
>so
>> automatically and I'm certainly on auto pilot today.
>>
>> I wouldn't have thought you need to install anything from your four disks
>> before re-installing JAWS, but take a careful look to see what you have.
>> (I certainly didn't receive four disks with my BLT 40 here in the UK so
>> wouldn't be sure what you have.)
>>
>> Once you have installed JAWS again with your BLT attached, you can go into
>> your DEFAULT.JCF, to Settings, Braille Options, and uncheck the box which
>> reads Show BRAILLELOAD. After this you will be able to boot up in Windows
>> and JAWS will speak whether you have the BLT attached or not.
>>
>> Hope this helps.
>>
>>
>> --
>> Carol Pearson
>> [EMAIL PROTECTED]
>>
>>
>>
>> At 11:38 13/09/99 -0700, Muhammad Fazil wrote:
>> >hi Carroll,
>> >Do you have any idea about the 4 disks that came with my Braille
>Lite2000?
>> >Should I install the software that might be in 1 of these disks, prior to
>> >attempting re-installation of jaws? Is there a way of getting around of
>> >attaching Braille lie to the PC, when you have just 1 serial-port on your
>> >computer and which is already occupied?
>> >----- Original Message -----
>> >From: Carol Pearson <[EMAIL PROTECTED]>
>> >To: Teresa Cochran <[EMAIL PROTECTED]>; Olga Espinola
>> ><[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
>> >Sent: Monday, September 13, 1999 6:54 AM
>> >Subject: Re: Long awaited Braille Lite2000 arrived to add to jfw33!
>> >
>> >
>> >> Theresa is right here. All works fine doing it the way she suggests
>and
>> >> means that, if your BLT is connected at boot up, you will get Braille
>> >> straight away without having to change the Braille settings.
>> >>
>> >> Les, in a previous message on this thread, you suggested it was not
>> >> necessary to re-install JAWS. In my experience, it is definitely
>> >necessary
>> >> because, if you just alter the JFW.INI file, you have no Braille tables
>> >> installed. Therefore, it is necessary, with the first Braille display
>you
>> >> install, that you re-install JAWS.
>> >>
>> >> Before you install, you should have the BLT attached and turned on.
>Use
>> >> the AR+P on the BLT to go into the relevant Speech Box mode. When you
>> >have
>> >> finished with the BLT in that mode or wish to go to local mode, use
>AR+P
>> >> again.
>> >>
>> >> Hope this helps.
>> >>
>> >>
>> >> --
>> >> Carol Pearson
>> >> [EMAIL PROTECTED]
>> >>
>> >>
>> >>
>> >>
>> >> At 17:10 11/09/99 -0700, Teresa Cochran wrote:
>> >> > Hi all,
>> >> > I use the BLT40 as the default Braille display. Then, when I know
>> >it's
>> >> >installed and working, I go into the default config manager, Braille
>> >> >options, and uncheck the "show Braille error" box. That way, if my
>unit
>> >is
>> >> >not attached when I boot up, the error doesn't appear, and things work
>> >fine.
>> >> >Teresa
>> >> >
>> >> >
>> >> >-
>> >> >Visit the jfw ml web page: http://jfw.cjb.net
>> >> >
>> >>
>> >> -
>> >> Visit the jfw ml web page: http://jfw.cjb.net
>> >>
>> >
>> >-
>> >Visit the jfw ml web page: http://jfw.cjb.net
>> >
>>
>> -
>> Visit the jfw ml web page: http://jfw.cjb.net
>>
>
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>
-
Visit the jfw ml web page: http://jfw.cjb.net
