hi carrol,
Now another question, since I don't have more than 1 serial port in my
computer, and the one which is there is taken by my scanner. the scanner in
turn, has a serial port which I plan to hook up the printer to. the
printer, I guess, will have a serial port, can I attach myBLT to the serial
port in printer?
----- Original Message -----
From: Carol Pearson <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Monday, September 13, 1999 3:21 PM
Subject: Re: Long awaited Braille Lite2000 arrived to add to jfw33!
> Hi Muhammad,
>
> First of all, I must apologise for an error in my last post. Teresa
gently
> woke me up with the reminder that I should have been saying
> AR-CHORD+P-CHORD and not AR+P in my previous post. Sorry! I just do it
so
> automatically and I'm certainly on auto pilot today.
>
> I wouldn't have thought you need to install anything from your four disks
> before re-installing JAWS, but take a careful look to see what you have.
> (I certainly didn't receive four disks with my BLT 40 here in the UK so
> wouldn't be sure what you have.)
>
> Once you have installed JAWS again with your BLT attached, you can go into
> your DEFAULT.JCF, to Settings, Braille Options, and uncheck the box which
> reads Show BRAILLELOAD. After this you will be able to boot up in Windows
> and JAWS will speak whether you have the BLT attached or not.
>
> Hope this helps.
>
>
> --
> Carol Pearson
> [EMAIL PROTECTED]
>
>
>
> At 11:38 13/09/99 -0700, Muhammad Fazil wrote:
> >hi Carroll,
> >Do you have any idea about the 4 disks that came with my Braille
Lite2000?
> >Should I install the software that might be in 1 of these disks, prior to
> >attempting re-installation of jaws? Is there a way of getting around of
> >attaching Braille lie to the PC, when you have just 1 serial-port on your
> >computer and which is already occupied?
> >----- Original Message -----
> >From: Carol Pearson <[EMAIL PROTECTED]>
> >To: Teresa Cochran <[EMAIL PROTECTED]>; Olga Espinola
> ><[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> >Sent: Monday, September 13, 1999 6:54 AM
> >Subject: Re: Long awaited Braille Lite2000 arrived to add to jfw33!
> >
> >
> >> Theresa is right here. All works fine doing it the way she suggests
and
> >> means that, if your BLT is connected at boot up, you will get Braille
> >> straight away without having to change the Braille settings.
> >>
> >> Les, in a previous message on this thread, you suggested it was not
> >> necessary to re-install JAWS. In my experience, it is definitely
> >necessary
> >> because, if you just alter the JFW.INI file, you have no Braille tables
> >> installed. Therefore, it is necessary, with the first Braille display
you
> >> install, that you re-install JAWS.
> >>
> >> Before you install, you should have the BLT attached and turned on.
Use
> >> the AR+P on the BLT to go into the relevant Speech Box mode. When you
> >have
> >> finished with the BLT in that mode or wish to go to local mode, use
AR+P
> >> again.
> >>
> >> Hope this helps.
> >>
> >>
> >> --
> >> Carol Pearson
> >> [EMAIL PROTECTED]
> >>
> >>
> >>
> >>
> >> At 17:10 11/09/99 -0700, Teresa Cochran wrote:
> >> > Hi all,
> >> > I use the BLT40 as the default Braille display. Then, when I know
> >it's
> >> >installed and working, I go into the default config manager, Braille
> >> >options, and uncheck the "show Braille error" box. That way, if my
unit
> >is
> >> >not attached when I boot up, the error doesn't appear, and things work
> >fine.
> >> >Teresa
> >> >
> >> >
> >> >-
> >> >Visit the jfw ml web page: http://jfw.cjb.net
> >> >
> >>
> >> -
> >> Visit the jfw ml web page: http://jfw.cjb.net
> >>
> >
> >-
> >Visit the jfw ml web page: http://jfw.cjb.net
> >
>
> -
> Visit the jfw ml web page: http://jfw.cjb.net
>
-
Visit the jfw ml web page: http://jfw.cjb.net
