Sorry for my bad translation, follows the configuration: *Interfaces*: show configuration interfaces ge-3/0/0 description "*BA* G2/47 - SW001"; gigether-options { 802.3ad ae0; } show configuration interfaces ge-3/0/3 description "*BA* G1/47 - SW001"; gigether-options { 802.3ad ae0; } show configuration interfaces ae0 description "*BA* Po150 - SW001"; mtu 9192; unit 0 { family inet { address 10.251.40.53/30; } }
*VRF instances*: show configuration routing-instances dados instance-type vrf; interface ae0.0; ... protocols { bgp { group PEER-SW001 { type external; hold-time 30; peer-as 65100; as-override; neighbor 10.251.40.54; } } What I need is to balance the outbound traffic of physical interfaces, see that is constant unbalance {master} RT110> show interfaces ge-3/0/0 | match rate Input rate : 271677184 bps (69055 pps) Output rate : 37802544 bps (10429 pps) {master} RT110> show interfaces ge-3/0/3 | match rate Input rate : 293302512 bps (61095 pps) Output rate : 628471504 bps (134276 pps) {master} RT110> show interfaces ge-3/0/0 | match rate Input rate : 298597864 bps (70456 pps) Output rate : 34856992 bps (8756 pps) {master} RT110> show interfaces ge-3/0/3 | match rate Input rate : 288075200 bps (57232 pps) Output rate : 657782056 bps (129224 pps) 2010/3/31 Stefan Fouant <sfou...@shortestpathfirst.net> > I'm sorry, your request is getting lost in translation. Why don't you just > show us your configs and do a 'show route x.x.x.x' and 'show route > forwarding-table destination x.x.x.x' for the route you are trying to > load-balance. > > Thanks, > > > Stefan Fouant > > Sent from my Verizon Wireless BlackBerry > ------------------------------ > *From: * Gabriel Farias <gabrielfaria...@gmail.com> > *Date: *Wed, 31 Mar 2010 18:51:04 -0300 > *To: *<sfou...@shortestpathfirst.net> > *Cc: *<juniper-nsp-boun...@puck.nether.net>; <juniper-nsp@puck.nether.net> > *Subject: *Re: [j-nsp] Load Balance in VRF by Junos > > I'm not using EBGP external type in PE (M120) > > Reagards, > Gabriel Farias > > 2010/3/31 Stefan Fouant <sfou...@shortestpathfirst.net> > >> Do you have multi-path enabled on your EBGP sessions? >> >> Stefan Fouant >> >> Sent from my Verizon Wireless BlackBerry >> ------------------------------ >> *From: * Gabriel Farias <gabrielfaria...@gmail.com> >> *Date: *Wed, 31 Mar 2010 18:32:18 -0300 >> *To: *<sfou...@shortestpathfirst.net> >> *Cc: *<juniper-nsp-boun...@puck.nether.net>; <juniper-nsp@puck.nether.net >> > >> *Subject: *Re: [j-nsp] Load Balance in VRF by Junos >> >> I have a section between EBGP VRF PE x CE via two physical connections >> (aggregate ethernet) and see the traffic unbalanced because the Junos uses >> the default flow. >> >> I need the traffic between the PE x CE is symmetrically balanced way, the >> previous setting and did not work, and within the configuration >> routing-instance <name> not have all the options. >> >> Thanks >> Gabriel Farias >> >> 2010/3/31 Stefan Fouant <sfou...@shortestpathfirst.net> >> >>> You need the following: >>> >>> 'set routing-option forwarding-table export load-balance' >>> >>> and >>> >>> 'set policy-options policy-statement load-balance then load-balance >>> per-packet' >>> >>> Sorry for the top-post, I'm on my Blackberry. >>> >>> HTHs. >>> >>> Stefan Fouant >>> ------Original Message------ >>> From: Gabriel Farias >>> Sender: juniper-nsp-boun...@puck.nether.net >>> To: juniper-nsp@puck.nether.net >>> Subject: [j-nsp] Load Balance in VRF by Junos >>> Sent: Mar 31, 2010 4:23 PM >>> >>> Hi members, >>> >>> >>> How to balance traffic between EBGP equipment Juniper M120 (PE) x Cisco >>> 6509 >>> (CE) Switch, which are connected via ethernet aggregated? >>> >>> >>> >>> I used the setup below and did not work the Juniper continues with the >>> output unbalanced traffic. >>> >>> >>> >>> configuration forwarding-options >>> >>> load-balance { >>> indexed-next-hop; >>> } >>> hash-key { >>> family inet { >>> layer-3; >>> layer-4; >>> } >>> } >>> >>> >>> Thanks, >>> >>> Gabriel Farias >>> _______________________________________________ >>> juniper-nsp mailing list juniper-nsp@puck.nether.net >>> https://puck.nether.net/mailman/listinfo/juniper-nsp >>> >>> >>> Sent from my Verizon Wireless BlackBerry >> >> >> > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp