Tim Howe writes: > 2018-01-11 09:04:51.971 ERROR [kea-dhcp6.dhcp6/45759] DHCP6_INIT_FAIL failed > to initialize Kea server: configuration error using file '/usr/local/etc/kea/ > kea.conf': subnet configuration failed: parser error: interface (defined for > locally reachable subnets) and interface-id (defined for subnets reachable vi > a relays) cannot be defined at the same time for subnet 2607:fda0:101:1601::/ > 64(/usr/local/etc/kea/kea.conf:180:9)
=> you confused interface which says this subnet is for the link directly connected to the interface, and interface-id which says the link is behind a relay which adds this opaque interface-id RAI suboption to packets which comes from clients on the link. Of course you can be in both cases at the same time. Remember I wrote after recommending the interface clause in subnet that I assume there is no relay. > Now I'm back to needing different subnets for each subscriber > again whereas they can share the same vlan with v4. => no, a vlan should map to a subnet (link in IPv6 terms). Thanks Francis Dupont <fdup...@isc.org> PS: the interfaces-config global clause specifies interfaces Kea is listen on. In ISC DHCP it is a command line parameter. _______________________________________________ Kea-users mailing list Kea-users@lists.isc.org https://lists.isc.org/mailman/listinfo/kea-users