My aero carb gave me lots of problems with ram air. during testing. The slide was difficult to move and I could not generate full power. Once the cowling was installed and the carb was ingesting cowling air, my RPM increased dramatically. I spoke to Marc Baca about this issue and he suggested that I change the plastic-bearing material associated with the slide to one recommended by Steve Glover and that should solve the problem. Presently I feel that I am still 400 RPM short of full power (I was expecting 3100 RPM). Luis On Monday, November 7, 2022 at 02:14:58 PM CST, MS <propbala...@att.net> wrote: Thanks Mark. Casual references lead to misunderstandings.
-- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet
-- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet
