--
Sent with GMX Mail app
Sent with GMX Mail app
On 4/9/26, 10:21 AM Larry Flesner via KRnet <krnet@list.krnet.org> wrote:
On 4/9/2026 4:18 AM, Phillip Matheson via KRnet wrote:
> Comps all 78/80 runs sweet , but won’t handle the recommended 60x 70
> So still playing. No wheel pants yet, more concerned in getting RPM and prop correct first, more than IAS.
> PHIL.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Phil,
Bummer you have to fight the issues that restrict the KR grin. I think
you're actually fighting three problems at once and correcting any one
will not fix the others. First is "drag", both parasitic and induced.
Parasitic are those wheels hanging out there in the 100+ mph wind and
the larger fuselage with enlarged frontal area and wetted area. As your
speed doubles the drag squares. Induced drag from the extra lift being
generated to lift the 400+ more pounds we're flying now days compared to
Ken's 700 AUW rocket at altitude with turboed engine. I once read that
every 100 pounds extra cost you 3 mph at cruise. If that is true then
our 400 to 500 pounds increase kills 12 to 15 mph. From what I
I'm hoping that Jeff Scott and Mike Sylvester might jump in as they both
flew / fly the larger heavier airframes with with 0-200 engines. If
they would give us there engine specs, prop pitch and diameter, cruise
rpm and IAS, as well as WOT rpm at cruise, you would have something to
compare.
I'm convinced that with today's KRs, using a totally stock 0-200
turning 2500 rpm at cruise, on a low drag airframe, 150 mph is the target.
I see Jeff just responded but I'll send this anyway. He did not say
what his rpm was at cruise to get 140K which would have been
interesting. His info indicates his lower drag airframe and hp boost
got him to 160mph cruise over my 150mph cruise.
Don't give up. The right combinations of prop and reduced drag should
bring back that KR grin.
Larry Flesner
---‐-‐-----------------------------------------
That was 140 kt @2650 rpm on my KR.
Of all the things I did to my plane, the largest gains in performance was building a set of custom individual tuned length headers, and the addition of the RV wheel fairings over my 5:00x5 tires. I made many other mods that almost all improved performance. They are all documented on my web site at [http://jeffsplanes.com]
As best I recall, my static RPM was down around 2250 - 2300 RPM. But things really picked up once it was in the air.
-Jeff Scott
Arkansas Ozarks.
-- KRnet mailing list [email protected] https://list.krnet.org/mailman/listinfo/krnet

