Hello everyone, I am interested in the layer of felt, Clay, Did you use wool or acrylic felt? Thanks,
Susie Morris, IL >I needed a pillow for a large project. I ordered foam blocks from >Ken van Dieren (he's in the US, as I am, but I'm sure you can find a >source in the UK). My pillow is wider than it is high, because I >reasoned that the space at the top would be wasted. So, I have >three 5.5" blocks on each side, and three 11" blocks going down the >middle. (14 and 28 cm) so the total width is 22" (about 56 cm) and >the height is 16.5" (42 cm). I started my work near the top of the >center block, and as I've progressed, I've just moved the blocks up. >I also made a pair of "half-blocks" which are 11" wide but only >2.75" deep. This makes it easier to move the blocks in smaller >steps. >My blocks are covered first with a layer of felt and then with navy >twill. It is a very satisfactory pillow, and I expect to use it for >a lot of things. > - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]