I like my bobbins to be all the same size and weight. I mostly work with large continentals (all the same) for thick yarns or spangled midlands bobbins, and they can vary a lot, in thickness and in length! If I mix sizes and weights it affects both tension and ease of working.
I keep the shorter ones (Springett's etc) in one box and the longer ones (most other English turners) in another box, and over the years I've been trying to make the spangles all much the same size; a lot of ready spangled bobbins have spangles which are a bit light for my taste so I end up adding a couple of beads but some of my older (used old, I don't have any antiques) bobbins have spangles which are too big and clunky. Bone is heavier than wood so I don't mix them with wooden bobbins, but I have a couple of antler horn and a glass bobbin which mix OK with bone, and from what I remember of the aluminium bobbins which were around c1980 (I never bought any) they were heavy enough to have mixed with bone. Plastic and wood will usually mix together OK. Brenda Sue Duckles wrote: > Do all bobbins need to be the same weight? IMHO I'd have thought not, > some old bobbins could have buttons on them, different weight to glass > beads.... or would one not put bone and wood bobbins together, or ones > with wood beads as opposed to glass. Some ebay sellers put plastic > beads on.... what do others think? > >>> >> -- Brenda in ALlhallows, Kent http://paternoster.orpheusweb.co.uk/ - To unsubscribe send email to [email protected] containing the line: unsubscribe lace [email protected]. For help, write to [email protected]
