i'm prevented from logging in and configuring my dachstein CD instance because of a boot hang. here is the final snippet from the console:
---------------------------------------------------------------- LINUXRC: Linux Router Project - Root v4.0.1 hda: ATAPI 6X CD-ROM drive, 256kB Cache Uniform CD-ROM driver Revision: 3.11 Root Device: ram0 LINUXRC: Installing... etc: /dev/hda ramlog: /dev/hda local: /dev/hda modules: /dev/hda LINUXRC: Finished autodetecting RAID arrays autorun ... ... autorun DONE. Freeing unused kernel memory: 52k freed INIT: version 2.78 booting Activating swap... Loading modules: ramdisk.mk: Creating ramdisk /dev/ram1 1376 inodes 4096 blocks Firstdatazone=47 (47) Zonesize=1024 Maxsize=268966912 Mounting local file systems... ramdisk.pkg: Uncompressing archives - log.tgz - Finished. Starting Network: [IP Always Defrag: ENABLED] IP filters: firewall [IP Forwarding: ENABLED] Loopback interface: lo Starting interface: Cannot find device "eth1" SIOCGIFFLAGS: Operation not supported by device eth1 Hostname: firewall Static NS: 2 hosts Local time: Sat Nov 17 13:24:47 UTC 2001 Initializing random number generator... done. INIT: Entering runlevel: 2 Starting system log daemon: syslogd klogd. Starting base networking daemons: inetd. Starting software watchdog... done. Starting periodic command scheduler: cron. Starting additional networking services:. ----------------------------------------------------------------- and that is the last thing it says. my dachstein floppy config used the modules pciscan, rtl8139, 8390, and ne2k-pci and worked without a problem. thoughts/comments? /mark
begin:vcard n:Kennedy;Mark x-mozilla-html:TRUE org:The Kennedy Family adr:;;;;;; version:2.1 email;internet:[EMAIL PROTECTED] x-mozilla-cpt:;-19168 fn:Mark Kennedy end:vcard
