Charles Steinkuehler wrote: > > > INIT: Entering runlevel: 2 > > Starting system log daemon: syslogd klogd. > > Starting base networking daemons: inetd. > > Starting software watchdog... done. > > Starting periodic command scheduler: cron. > > Starting additional networking services:. > > ----------------------------------------------------------------- > > > > and that is the last thing it says. my dachstein floppy config used > > the modules pciscan, rtl8139, 8390, and ne2k-pci and worked without a > > problem. > > > > thoughts/comments? > > Looks like it's booting properly, but something is obviously going > wrong...how much memory do you have? The CD kind of assumes you've got a > fair amount of RAM, creating a 12 Meg /dev/ram0 and a 4 meg /dev/ram1 by > default, so you need something like 20Meg+ to actually run...I typically put > 32 Meg in my systems. Saddly, if you need to lower (or raise) the size of > the initial ramdisk, you have to either boot from floppy, or burn a new CD > image, with a modified bootdisk.bin (so you can pass new parameters to the > kernel when it boots). > > Charles Steinkuehler > http://lrp.steinkuehler.net > http://c0wz.steinkuehler.net (lrp.c0wz.com mirror)
it is an old dell 166MHz box with 64M of ram. any way to tell it to load specific modules from the boot command line? /mark
begin:vcard n:Kennedy;Mark x-mozilla-html:TRUE org:The Kennedy Family adr:;;;;;; version:2.1 email;internet:[EMAIL PROTECTED] x-mozilla-cpt:;-19168 fn:Mark Kennedy end:vcard