Am Dienstag, 25. Februar 2003 16:42 schrieb Henning Jebsen: > Julian Church wrote: > Thanks for your quick reply. > > >> connecting ppp0 <-> eth0 > >> Shouldn't it be ppp0 <-> /dev/ttyp0 ? > > > > Maybe for ppp over the usual serial link, but for pppoe, ppp0 <-> eth0 > > is right AFAIK. > > Normally I use Floppy-firewall 2.x. This works fine for > months now. Using that floppyfirewall, PPPD connects to ttyp0, so I > thought, *here* it should do the same. But I am not sure, because > Floppyfirewall uses RP-PPPoe. > > > You don't mention what LEAF distro you're using, but if you're using > > Bering, then there is (I think) a quick solution to this. > > oops, sorry, I use Bering 1.0 stable > > > Edit /etc/shorewall/shorewall.conf - find the line that says > > CLAMPMSS=No > > Yes, I already did this some days ago. But this is not the problem, > because shorewall is not yet started. > > I just made fresh Floppy from the imagefile and changed only > the most nessecary things and got the same error: > "Could not set MTU/MRU to 1500" .... :-( > It seems, PPPD does not get the parameters from > /etc/ppp/peers/dsl-provider correctly > > And one more question: When the floppy comes up, it tries > to chat to a modem ! CHAT: AT --- failed.... I got no modem > indeed, i got an ethernet card .... > So I start PPPD manually: > "pon dsl-provider eth0" to get the error, described above...
Is lrcfg -> "1" -> "1" correctly configured? Do you load pppoe.so (there is a pppoe section in modules.conf). kp ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html