Curt, the larger bearing is a pillow block style bearing ( CSB 205-16 ) but it uses a Legacy laser cut mount instead of the standard pillow block. The tapered bearing (can't find the numbers for the race and bearing at this moment ) also has a custom mount. Bill can you confirm if the tapered bearing is a LM11949/LM11910? The bore id is .750", od 1.781" and the width is .655".
There's differences between the spindles on the two machines as well as the height of the headstock units. I'd love to get specific, but I can't find my notes on this and it's really bugging me. I also think you will have clearance issues trying to find a small bearing to work on the standard 900 with the delrin bushings. If you can find bearings to fit the delrin style headstock that would be a very desirable upgrade. -Tim ----- Original Message ----- From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, September 27, 2012 7:59 AM Subject: my burnt mill I pulled the burnt bearings out of the headstock of my destroyed 900 today here is what they look like if no one has seen the ball bearing bearings before im going to try and buy something similar here and convert the delrin sleeves in the 900 i got over to ball bearings if i can Bill -- --
