Bill, I found my notes. The tapered bearing is a 09067 and the race is a 09195. That's a 3/4" bore with an OD of 1.938" and a width of .71". The other bearing is a CSB205-16 as I mentioned originally.
So my question is do you have any updates on this part? Last I recall you might have found some bearings that would fit the delrin style headstock. -Tim ----- Original Message ----- From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, September 27, 2012 6:05 PM Subject: Re: my burnt mill There's differences between the spindles on the two machines as well as the height of the headstock units. I'd love to get specific, but I can't find my notes on this and it's really bugging me. -Tim ----- Original Message ----- From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, September 27, 2012 7:59 AM Subject: my burnt mill I pulled the burnt bearings out of the headstock of my destroyed 900 today here is what they look like if no one has seen the ball bearing bearings before im going to try and buy something similar here and convert the delrin sleeves in the 900 i got over to ball bearings if i can Bill -- -- -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.