Here's an upgraded Z Axis on Ebay for those wanting a quick fix for $300-400
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=251615787883&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en On Wed, Aug 13, 2014 at 4:18 AM, CURTIS GEORGE <curtgeo...@wowway.com> wrote: > Hello Brandon > I see no reason why that would not work, the slop/play in this set up is > removed once you lock the riser into place. this might cause you to do > more work on your legacy slightly different, instead of just plunging down, > you most likely will need to lower the router from the side lock in place > and then move the Y axis back towards the center,which is the way that I > normally do most of my cutting on spindles any ways. as far as the tilting > element. I think I will agree with Tim on that one, start small and you can > always add to it latter. > good luck on your project. Im looking forwards to seeing how it turns out > for you. ;-) > C.A.G. > > ------------------------------ > Here is a link to Mattias' router lift that I am basing my design on: > > Building the tilting router lift: http://youtu.be/C-FxDj10Fhc > > Brandon > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills > . > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills > . > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
