Hello Joe (and everyone else reading here.)
I know we are con pairing, Apples- Roses ;-p but this web site, has some neat
things to look at. Not only the machine but perhaps some of the parts, (and
perhaps just looking at the way it works? might help.)
Mandala Rose Engine
|
|
| |
Mandala Rose Engine
Mandala Rose Works, LLC is a provider of woodworking and metalworking products
and services. We sell Rose Engin...
|
|
|
Note. the rose lathe is not the only OT machine around, the Legacy is more like
the Holtzapffel Lathe, then it is to the Rose Engine lathe. I have found the
Holtzapffel sites more use-full for me to envision how to make the Legacy into
a more OT/OM Machine...
C.A.G.
On Saturday, December 8, 2018, 12:58:03 PM EST, 'joe biunno' via Legacy
Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:
here is a photo I found on the web of a cluster of wave pattern wheels...
imagine a set up like this for this Legacy mod... the hex rod that I posted
previously, traversing through the center of these wheels... those brass
carriers, also posted, with the flange, locking the cluster together and
allowing all of the discs to slide along the hex rod... then that assembly is
mounted to the legacy router carriage and projects just a bit above the Legacy
lead screw and a bit away from the machine so the cluster has the necessary
clearance while traveling left and right... note the rubbing wheel bearing
mounted to a piece of bar steel, as in the photo... this bearing setup would be
attached to the Legacy router bed, as low as possible, and of course, be
adjustable left and right, so any wheel pattern could be used... this project
might just motivate me to look into an inexpensive, 3D, drawing program...
later guys... Joe
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
