Hello Richard.Nice job. Did the wave turn out as you had wanted ?
I mean, if you did planed the cuts to work that way, I say, Awesome job ! if
not, do you know what happened? And or Why? It took me a long time to figure
out how to do that cut.
Good job. I cant wait to see more.
C.A.G.
On Tuesday, August 20, 2019, 12:54:57 PM EDT, Richard Ellis
<rchrd.ell...@gmail.com> wrote:
Here is a pic of the curves There are five curves and I was thinking of
putting a straight groove in between. All good practice !!
On Tuesday, August 20, 2019 at 10:52:58 AM UTC+1, aussiman wrote:
Looks good so far
Bill
From: legacy-orna...@ googlegroups.com <legacy-orna...@ googlegroups.com> On
Behalf Of Richard Ellis
Sent: Tuesday, 20 August 2019 4:59 PM
To: Legacy Ornamental Mills <legacy-orna...@ googlegroups.com>
Subject: Re: TK Reciprocater long curves
Just taken a quick pic of the basic (start ) of a coat and hat stand.
It is 38 inches long X2 inch dia. May decde to make dia smaller !!! It of
course only approx half of the stand height.
The four inch TK curve will be spaced eqidistance around the dia. but will have
a straight flute between each curve,
Will take more pics Later if time permits !!??
On Tuesday, August 20, 2019 at 7:09:38 AM UTC+1, Richard Ellis wrote:
Hi Bill Tim & Curt
I will have to settle for a 4 inch curve When I have time to change the TK to
the 2X .Need a different gear set up for anything longer ( Not LOM )
I will update you when I take a pic of the wood I am using and it's purpose
also the dimensions.
Bit too busy at the present time to do much with the Revo or 900.
Richard
On Sunday, August 18, 2019 at 5:38:02 PM UTC+1, Curt George wrote:
Here is the longest pitch with a wave that I have done. Is this like what you
want to make?
C.A.G.
On Sunday, August 18, 2019, 11:12:04 AM EDT, 'Curt George' via Legacy
Ornamental Mills <legacy-orna...@googlegroups. com> wrote:
Good morning.
Richard, What router bit are you using?
What Tim and Bill already said are correct. but the type of cut you make also
makes the wave look different. depending on the diameter of the work piece and
the cutter's size, as well as the depth of your cut will give you different
looks. And also will the method of cutting. (Cutting for the top vs cutting
form the side of the wood will also change the look.)
Here are a few different looks you can get with a long pitch and different
cutters.
C.A.G.
On Sunday, August 18, 2019, 07:53:29 AM EDT, <bulk...@mmnet.com.au> wrote:
If I remember correctly the wave or zigzag the biggest you can achieve as it
travels along is around 90 degrees so virtually no degrees to 90.
But the pitch how long the waves are governed by the pitch just the same as
spirals are so do some waves at different pitches and see, so my guess would be
yes 2x would give 4 inch . please report how you go I would be greatly
interested to see, if it wasn’t so dam cold here out in the shop I would try a
few and report back.
Bill
From: legacy-orna...@googlegroups. com <legacy-orna...@googlegroups. com> On
Behalf Of Richard Ellis
Sent: Sunday, 18 August 2019 7:47 PM
To: Legacy Ornamental Mills <legacy-orna...@googlegroups. com>
Subject: TK Reciprocater long curves
Hi all you LOM experts
I am trying to do a long (approx ) 6 inch flute with the TK at present with the
standard index gear I get a 2 inch point to point curve
If I change to the 2X gear I think it will only give me a four inch point to
point --- I have not tried but it's my guess !!
Am I trying to do the impossible???
Richard
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/
msgid/legacy-ornamental-mills/ e560996b-0be6-44a0-8bf9-
abf99146f57c%40googlegroups. com.
|
|
Virus-free. www.avast.com
|
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/
msgid/legacy-ornamental-mills/ 000001d555bb%24878d08f0%
2496a71ad0%24%40mmnet.com.au.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/
msgid/legacy-ornamental-mills/ 762244031.589832. 1566141100017%40mail.yahoo.com
.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/
msgid/legacy-ornamental-mills/ 02923194-a11a-4804-8ac2-
cd41967adfb1%40googlegroups. com.
| | Virus-free. www.avast.com |
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/5ed55d80-e6fa-4977-a6bb-61459f288955%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/2007086354.73784.1566361193591%40mail.yahoo.com.
