Am I the only one that does not see a picture or an attachment? Sent from
Samsung tablet
-------- Original message --------From: Richard Ellis <rchrd.ell...@gmail.com>
Date: 8/28/19 11:49 PM (GMT-08:00) To: Legacy Ornamental Mills
<legacy-ornamental-mills@googlegroups.com> Subject: Re: TK Reciprocater long
curves Hi Here is the pic of my maximum height of wave. I don't need to go to
the extreme but do need the waves to be more exaggerated i:e more
stormy-------just want to rock the boat!!!!! Hence a longer piston rod , When I
get one made .Richard On Tuesday, August 20, 2019 at 5:54:51 PM UTC+1, Richard
Ellis wrote:Here is a pic of the curves There are five curves and I was
thinking of putting a straight groove in between. All good practice !!On
Tuesday, August 20, 2019 at 10:52:58 AM UTC+1, aussiman wrote:Looks good so far
Bill From: legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com>
On Behalf Of Richard EllisSent: Tuesday, 20 August 2019 4:59 PMTo: Legacy
Ornamental Mills <legacy-orna...@googlegroups.com>Subject: Re: TK Reciprocater
long curves Just taken a quick pic of the basic (start ) of a coat and hat
stand.It is 38 inches long X2 inch dia. May decde to make dia smaller !!! It of
course only approx half of the stand height.The four inch TK curve will be
spaced eqidistance around the dia. but will have a straight flute between each
curve,Will take more pics Later if time permits !!??On Tuesday, August 20, 2019
at 7:09:38 AM UTC+1, Richard Ellis wrote:Hi Bill Tim & CurtI will have to
settle for a 4 inch curve When I have time to change the TK to the 2X .Need a
different gear set up for anything longer ( Not LOM )I will update you when I
take a pic of the wood I am using and it's purpose also the dimensions.Bit too
busy at the present time to do much with the Revo or 900.RichardOn Sunday,
August 18, 2019 at 5:38:02 PM UTC+1, Curt George wrote:Here is the longest
pitch with a wave that I have done. Is this like what you want to make?C.A.G.On
Sunday, August 18, 2019, 11:12:04 AM EDT, 'Curt George' via Legacy Ornamental
Mills <legacy-orna...@googlegroups.com> wrote: Good morning.Richard, What
router bit are you using? What Tim and Bill already said are correct. but the
type of cut you make also makes the wave look different. depending on the
diameter of the work piece and the cutter's size, as well as the depth of your
cut will give you different looks. And also will the method of cutting.
(Cutting for the top vs cutting form the side of the wood will also change the
look.) Here are a few different looks you can get with a long pitch and
different cutters. C.A.G. On Sunday, August 18, 2019, 07:53:29 AM EDT,
<bulk...@mmnet.com.au> wrote: If I remember correctly the wave or zigzag the
biggest you can achieve as it travels along is around 90 degrees so virtually
no degrees to 90. But the pitch how long the waves are governed by the pitch
just the same as spirals are so do some waves at different pitches and see, so
my guess would be yes 2x would give 4 inch . please report how you go I would
be greatly interested to see, if it wasn’t so dam cold here out in the shop I
would try a few and report back. Bill From: legacy-orna...@googlegroups.com
<legacy-orna...@googlegroups.com> On Behalf Of Richard EllisSent: Sunday, 18
August 2019 7:47 PMTo: Legacy Ornamental Mills
<legacy-orna...@googlegroups.com>Subject: TK Reciprocater long curves Hi all
you LOM expertsI am trying to do a long (approx ) 6 inch flute with the TK at
present with the standard index gear I get a 2 inch point to point curve If I
change to the 2X gear I think it will only give me a four inch point to point
--- I have not tried but it's my guess !!Am I trying to do the
impossible???Richard-- You received this message because you are subscribed to
the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this
group and stop receiving emails from it, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.to view this discussion on
the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/e560996b-0be6-44a0-8bf9-abf99146f57c%40googlegroups.com.
Virus-free. www.avast.com -- You received this message because you are
subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe
from this group and stop receiving emails from it, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.to view this discussion on
the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d555bb%24878d08f0%2496a71ad0%24%40mmnet.com.au.--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.To unsubscribe from this group and stop
receiving emails from it, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.to view this discussion on
the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/762244031.589832.1566141100017%40mail.yahoo.com.--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.To unsubscribe from this group and stop
receiving emails from it, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.to view this discussion on
the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/02923194-a11a-4804-8ac2-cd41967adfb1%40googlegroups.com.
Virus-free. www.avast.com
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/9ce2cee5-7b97-402e-b53e-bc0ac1caf337%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d67b1be.1c69fb81.415bc.280bSMTPIN_ADDED_MISSING%40gmr-mx.google.com.
