Richard none of your pictures are coming through on the emails copy and attach them to the emails before you end them
Bill From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Richard Ellis Sent: Friday, 30 August 2019 1:24 AM To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> Subject: Re: TK Reciprocater long curves Hi Tim Not the pic I meant to put on, but the finished article ! How right you are, ---so i stopped thinking and did my wave pattern. It is on a piece of wood about 1 3/4 inc dia. and is a three wave one way and then a reverse three. Looks o.k. but maybee should have been a little deeper (Me thinks ) You can see that is the highest wave that I can get until I lengthen the piston rod.____Don't know what you think and can I make it more fancy Richard On Thursday, August 29, 2019 at 12:22:10 PM UTC+1, Tim wrote: I was about to say that you all are thinking way too much anyway! On Aug 29, 2019, at 4:19 AM, Richard Ellis <rchrd...@gmail.com <javascript:> > wrote: Tim I posted a reply to a previous answer and it included the pic, So this reply I thought wood have included the pic I shall have to stop thinking !!!!!!! and put the pic up again Richard On Thursday, August 29, 2019 at 12:06:39 PM UTC+1, Tim wrote: Am I the only one that does not see a picture or an attachment? Sent from Samsung tablet -------- Original message -------- From: Richard Ellis <rchrd...@gmail.com <mailto:rchrd...@gmail.com> > Date: 8/28/19 11:49 PM (GMT-08:00) To: Legacy Ornamental Mills <legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> > Subject: Re: TK Reciprocater long curves Hi Here is the pic of my maximum height of wave. I don't need to go to the extreme but do need the waves to be more exaggerated i:e more stormy-------just want to rock the boat!!!!! Hence a longer piston rod , When I get one made . Richard On Tuesday, August 20, 2019 at 5:54:51 PM UTC+1, Richard Ellis wrote: Here is a pic of the curves There are five curves and I was thinking of putting a straight groove in between. All good practice !! On Tuesday, August 20, 2019 at 10:52:58 AM UTC+1, aussiman wrote: Looks good so far Bill From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> <legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> > On Behalf Of Richard Ellis Sent: Tuesday, 20 August 2019 4:59 PM To: Legacy Ornamental Mills <legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> > Subject: Re: TK Reciprocater long curves Just taken a quick pic of the basic (start ) of a coat and hat stand. It is 38 inches long X2 inch dia. May decde to make dia smaller !!! It of course only approx half of the stand height. The four inch TK curve will be spaced eqidistance around the dia. but will have a straight flute between each curve, Will take more pics Later if time permits !!?? On Tuesday, August 20, 2019 at 7:09:38 AM UTC+1, Richard Ellis wrote: Hi Bill Tim & Curt I will have to settle for a 4 inch curve When I have time to change the TK to the 2X .Need a different gear set up for anything longer ( Not LOM ) I will update you when I take a pic of the wood I am using and it's purpose also the dimensions. Bit too busy at the present time to do much with the Revo or 900. Richard On Sunday, August 18, 2019 at 5:38:02 PM UTC+1, Curt George wrote: Here is the longest pitch with a wave that I have done. Is this like what you want to make? C.A.G. <https://groups.google.com/group/legacy-ornamental-mills/attach/e0b3e7c62df30/long%20wave.JPG?part=0.1&view=1&authuser=0> On Sunday, August 18, 2019, 11:12:04 AM EDT, 'Curt George' via Legacy Ornamental Mills <legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> > wrote: Good morning. Richard, What router bit are you using? What Tim and Bill already said are correct. but the type of cut you make also makes the wave look different. depending on the diameter of the work piece and the cutter's size, as well as the depth of your cut will give you different looks. And also will the method of cutting. (Cutting for the top vs cutting form the side of the wood will also change the look.) Here are a few different looks you can get with a long pitch and different cutters. C.A.G. On Sunday, August 18, 2019, 07:53:29 AM EDT, <bulk...@mmnet.com.au <mailto:bulk...@mmnet.com.au> > wrote: If I remember correctly the wave or zigzag the biggest you can achieve as it travels along is around 90 degrees so virtually no degrees to 90. But the pitch how long the waves are governed by the pitch just the same as spirals are so do some waves at different pitches and see, so my guess would be yes 2x would give 4 inch . please report how you go I would be greatly interested to see, if it wasn’t so dam cold here out in the shop I would try a few and report back. Bill From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> <legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> > On Behalf Of Richard Ellis Sent: Sunday, 18 August 2019 7:47 PM To: Legacy Ornamental Mills <legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> > Subject: TK Reciprocater long curves Hi all you LOM experts I am trying to do a long (approx ) 6 inch flute with the TK at present with the standard index gear I get a 2 inch point to point curve If I change to the 2X gear I think it will only give me a four inch point to point --- I have not tried but it's my guess !! Am I trying to do the impossible??? Richard -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/e560996b-0be6-44a0-8bf9-abf99146f57c%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/e560996b-0be6-44a0-8bf9-abf99146f57c%40googlegroups.com?utm_medium=email&utm_source=footer> . <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avast.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d555bb%24878d08f0%2496a71ad0%24%40mmnet.com.au <https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d555bb%24878d08f0%2496a71ad0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/762244031.589832.1566141100017%40mail.yahoo.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/762244031.589832.1566141100017%40mail.yahoo.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/02923194-a11a-4804-8ac2-cd41967adfb1%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/02923194-a11a-4804-8ac2-cd41967adfb1%40googlegroups.com?utm_medium=email&utm_source=footer> . <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avast.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/9ce2cee5-7b97-402e-b53e-bc0ac1caf337%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/9ce2cee5-7b97-402e-b53e-bc0ac1caf337%40googlegroups.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/06bad733-63f4-490b-8276-0ad9194c1614%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/06bad733-63f4-490b-8276-0ad9194c1614%40googlegroups.com?utm_medium=email&utm_source=footer> . --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d55e86%24a0881880%24e1984980%24%40mmnet.com.au.
