That is nice work Thanks Bill Sent from my iPad
> On May 8, 2020, at 11:16 PM, bulke...@mmnet.com.au wrote: > > > https://ornamentalmills.com/Bill_Bulkeley/tilting-z-axis/index.html > > this was my z axis I used a plunge router to add fine adjustment to the > depth. Today I would use the small triton router instead of the ryobi the > triton has the fine plunge screw. > > Bill > > From: legacy-ornamental-mills@googlegroups.com > <legacy-ornamental-mills@googlegroups.com> On Behalf Of bulke...@mmnet.com.au > Sent: Saturday, 9 May 2020 2:01 PM > To: legacy-ornamental-mills@googlegroups.com > Subject: RE: Question on the Legacy's Z axis > > My home made z axis which was made similar to legacy version had the same > problem of movement I fixed this by > Adding stops one each side and extra clamping this stopped movement and > allowed repeated depth settings > > > Bill > > From: legacy-ornamental-mills@googlegroups.com > <legacy-ornamental-mills@googlegroups.com> On Behalf Of russ veinot > Sent: Saturday, 9 May 2020 12:21 PM > To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> > Subject: Re: Question on the Legacy's Z axis > > I got my 1200 with the original Porter-Cable router. When the Z axis upgrade > become available, I only remember how expensive it was. I never knew till > now that it had issues (not a real surprise to me). What I did for my 1200 > was install a Shop Fox D2893 Veneer Press Clamp to control my Z axis. It > works very well and cost only about $10 and a little scrap wood. > The clamp I used can be seen at link: > https://www.toolplanet.com/product/Shop-Fox-Press-Clamp-D2893/clamps?msclkid=bbd588b4d7521db73f58d602d8a0e35a&utm_source=bing&utm_medium=cpc&utm_campaign=BPA%20-%20General&utm_term=4579465930354407&utm_content=BPA%20-%20General > > I did a video about this upgrade on YouTube (of course :>) that you can see > at link: > https://www.youtube.com/watch?v=Sxn3HZAWrao&list=PLKEP8I-wf5kFaEcZMc5ekLwyVpVpZ0eX-&index=5&t=0s > > Hope this helps > Russ > > ************************************************************************************ > > On Friday, May 8, 2020 at 8:57:12 AM UTC-5, Curt George wrote: > Hello Everyone. > > I was asked in a private e-mail about the Legacy's Z axis. The Gentleman owns > a model 1200 and wants more... > > Now Everyone here knows that Legacy no longer sells the parts he wants. I > suggested that the question be brought up to the group. (so that's why I am > posting this question to the group.) > > Everyone here knows that I made my Own Z axis For my Legacy 1000ex. ,(So, I > will be adding my own 2 cents on this topic latter.) Has anyone else made > there own? or have any plans to try to? > > Part 2 of the question. > A lot of people own the Original Z axis that Legacy made. What's the Pro's > and Con's of it. What do you like and or dis-like about it. > Is there anything about it you would change? and if so how? and why? > > Any and all ideas or thoughts are welcome. > > Have a good day. > > C.A.G. > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/b9e4818b-86d0-4c4d-be4f-aaf72f49f127%40googlegroups.com. > > > Virus-free. www.avast.com > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d625b6%247f478f00%247dd6ad00%24%40mmnet.com.au. > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d625b8%249cb7f500%24d627df00%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/A4E5EF35-CE31-46D5-9752-B67CCB9B0C5C%40yahoo.com.
