Thanks to all of you. Good information. One more question. Does anyone know where I can get the template for design work? Also any instructional books or videos on the LOM 1200? Thanks again Denson
Sent from Mail for Windows 10 From: 'Curt George' via Legacy Ornamental Mills Sent: Saturday, May 9, 2020 12:33 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question on the Legacy's Z axis Hello again. One more note. Amazon has lots of Z axis and Linear rail that the prices are pretty good. It might not hurt to look some of them up, Just perhaps you will be able to find something that you can add to your machines? Perhaps something like this... https://www.amazon.com/Linear-Actuator-Ballscrew-Double-Optical/dp/B07RLF9DPL/ref=sr_1_12?d Linear Stage Actuator 100mm Have a good night. C.A.G. On Saturday, May 9, 2020, 01:27:14 AM EDT, <bulke...@mmnet.com.au> wrote: Stop build it then fix any issues as they happen I think, a plunge router on a Z axis is needed if it’s a tilting router on the Z axis Bill From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of artmarb...@comcast.net Sent: Saturday, 9 May 2020 2:58 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Question on the Legacy's Z axis Hi Bob, Have you tried looking at the top-hat bushings? They can be rotated to another spot and they will be like brand new. To all, Their were 3 designs that I’m aware of. The last design did have a plunge rod like the plunge routers to help with the plunge problem. Another more frequently written about is how the first version, there is a stop on the left side. In use, it is driven down by the power of the acme thread and that causes the router to plunge deeper. For that a showed an example rework of the stop. It’s somewhere buried in the old messages. It’s probably in 2012. I’ve never seen anyone use a plunge router in a z-axis design. I’ve thought about it and I think it’s not needed. Sitting in my shop there are parts for a z-axis for the newer style machines, but I’ve not finished the design yet. Curt keeps nudging with new ideas, and at some point you just need to freeze a design and build it. Fix any issues on the next one and hopefully the third one will work! -Tim From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Bob Mark Sent: Friday, May 8, 2020 11:33 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question on the Legacy's Z axis I have the crank style Z axis with digital readout. It uses a height bar setup. You dial in the height and lock the bar. Then try to reproduce that height, no way. As the router drops, the z carriage cocks a little to one side and goes deeper than set. I have done all I can think of to take the play out of the carriage, but to no avail. When i purchased this upgrade i thought it was cool. Not so much now. When the router is running it will settle some on its own. I will eventually come up with somehing. Sent from Bob Mark's iPad On May 8, 2020, at 6:57 AM, 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote: Hello Everyone. I was asked in a private e-mail about the Legacy's Z axis. The Gentleman owns a model 1200 and wants more... Now Everyone here knows that Legacy no longer sells the parts he wants. I suggested that the question be brought up to the group. (so that's why I am posting this question to the group.) Everyone here knows that I made my Own Z axis For my Legacy 1000ex. ,(So, I will be adding my own 2 cents on this topic latter.) Has anyone else made there own? or have any plans to try to? Part 2 of the question. A lot of people own the Original Z axis that Legacy made. What's the Pro's and Con's of it. What do you like and or dis-like about it. Is there anything about it you would change? and if so how? and why? Any and all ideas or thoughts are welcome. Have a good day. C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1612994058.9537.1588946225009%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/61B7DD2F-0569-4F09-8E30-0C9CB8B411A1%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/005301d625be%2463f590a0%242be0b1e0%24%40comcast.net. Virus-free. www.avast.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d625c2%24742f7a40%245c8e6ec0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1039935941.50519.1589002423612%40mail.yahoo.com. -- This email has been checked for viruses by AVG. https://www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/5eb6b278.1c69fb81.c8180.b8e8SMTPIN_ADDED_MISSING%40gmr-mx.google.com.