From: bulke...@mmnet.com.au <bulke...@mmnet.com.au>
Sent: Friday, 29 July 2022 12:19 PM
To: 'legacy-ornamental-mills@googlegroups.com'
<legacy-ornamental-mills@googlegroups.com>
Subject: RE: First LOM twist
I see that screw is a difficult one to solve no room to mount a coil spring
loaded pin perhaps one like this might fit
If there is enough room.
Bill
From: legacy-ornamental-mills@googlegroups.com
<mailto:legacy-ornamental-mills@googlegroups.com>
<legacy-ornamental-mills@googlegroups.com
<mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Dan Krager
Sent: Friday, 29 July 2022 11:37 AM
To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com
<mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: First LOM twist
Bill, I put the screw in from the outside to be able to use a screw driver
better. I hate slotted screws, so it will be replaced by a flat head hex
machine screw. I couldn't think of how to hold this tiny thing, so I threaded
the hole in the axis arm and pass the screw through the SIG to thread into the
arm. This keeps the clearance acceptable and the connection tight. I've just
considered the case of moving the carriage on a straight, non-spiral cut and
how to hold the index with the axis. With the gears disengaged, the original
indexing pin can be used as normal as long as the arm remains pinned to the
SiG. It's in the middle of some test runs and the first three passes of 8
worked just fine. It really doesn't take much time to move the pin (screw) to
the next index, but it is not as fast as a tapered pin like the original. It
will get better with the socket head screw. I'm open to ideas.
I have completed the spoon bowl and put the first coat of oil on it today.
It's a looker alright. A couple more coats and a polish (wax) will be the
makeup for a photo in a couple days.
The test run is trying to salvage the little spoon spiral that I buggered up
using the "old" methods.
DanK
On Thursday, July 28, 2022 at 8:27:23 PM UTC-4 aussiman wrote:
<https://groups.google.com/group/legacy-ornamental-mills/attach/1937dc9e10d53/image001.png?part=0.1>
Dan I thought you might have put your indexing screw in from the back instead
of from the front, having a point on the end of the screw might help speed up
your indexing time . I can see how your idea works without a video, it is a
different way of indexing the starts on a spiral the idea is very similar to
curts design I can see how it will make indexing easier and more simple for
you as curts one did for him.
I have done the gauge block method for so long and so many times now I find it
more easy for me, but in the end what ever method each user uses as long as
they are comfortable with it is the important thing as curt says there a many
ways to skin a cat and when the end result is a perfect spiral each way is all
good
Keep those good inventive ideas coming Dan I love legacy mill mods.
Bill
From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>
<legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> > On
Behalf Of Dan Krager
Sent: Friday, 29 July 2022 8:50 AM
To: Legacy Ornamental Mills <legacy-orna...@googlegroups.com
<mailto:legacy-orna...@googlegroups.com> >
Subject: Re: First LOM twist
I did post a link to a very short video
<https://drive.google.com/file/d/15pIQani7juLUeyE8zVCWRzfkDm47Uou3/view?usp=sharing>
about the index arm movement. I'm not set up for video making. The pictures
tell the whole story pretty well, but I'll see about getting enough to show a
couple starts. I'm salvaging the buggered up small spoon so that might be a
good candidate tomorrow.
DanK
On Thursday, July 28, 2022 at 1:16:10 PM UTC-4 timjz...@gmail.com
<mailto:timjz...@gmail.com> wrote:
Hey Dan,
Thats super cool when a plan comes together. Can you do a short video and post
it as well so we
can all get a little better hand on how it all works and come together?
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 <tel:(320)%20294-5798> shop
320-630-2243 <tel:(320)%20630-2243> cell
On Thu, Jul 28, 2022 at 10:36 AM Dan Krager <cdkr...@gmail.com
<mailto:cdkr...@gmail.com> > wrote:
The final piece has been made and installed. I am thrilled that FINALLY, one
of my ideas has worked out! And it does work reliably. The weak part of the
design is the time consumed to change the pin because it threads into the bar
on the other side of the SIG, though it is not bad. I used a slotted machine
screw because that is what I had with a taper, but I am planning to replace
that with a flat head socket screw for easier wrench work and easier to insert
into next hole.
<https://groups.google.com/group/legacy-ornamental-mills/attach/4aa3e98c9a6bc/temp5.JPG?part=0.1&view=1>
DanK
On Thursday, July 28, 2022 at 12:02:51 AM UTC-4 Curt George wrote:
Hello Dan
Very nice work On your spoon!
I am very happy for you.
Keep up the good work,
I too, am looking
forward to seeing your bowl.
C.A.G.
On Monday, July 25, 2022 at 05:03:23 PM EDT, bulk...@mmnet.com.au
<mailto:bulk...@mmnet.com.au> <bulk...@mmnet.com.au
<mailto:bulk...@mmnet.com.au> > wrote:
On the contrary its very much to look at very nice work Dan cant wait to see
the bowl
Bill
From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>
<legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> > On
Behalf Of Dan Krager
Sent: Tuesday, 26 July 2022 2:49 AM
To: Legacy Ornamental Mills <legacy-orna...@googlegroups.com
<mailto:legacy-orna...@googlegroups.com> >
Subject: First LOM twist
Hi guys. I'm still riding a high of successfully cutting my first involute
spur gear for one of my machines.
So, riding that high, I decided to do some wood turnng. Utensils came to mind,
so very soon a couple of spoon blanks were on the LOM for another first...the
first twists cut on the REVO. Used a straight 1/2" up cut spiral bit against
the side. Six starts. Not much to look at for design and the handle is much to
large, but the pear wood cuts beautifully. Another smaller spoon is on its
way.
Now to carve the bowl. This stuff is HARD.
<https://groups.google.com/group/legacy-ornamental-mills/attach/47ef40a65c7a5/image001.jpg?part=0.1&view=1>
DanK
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental...@googlegroups.com
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/cba288e3-f046-44ae-95d6-86745def2e50n%40googlegroups.com
<https://groups.google.com/d/msgid/legacy-ornamental-mills/cba288e3-f046-44ae-95d6-86745def2e50n%40googlegroups.com?utm_medium=email&utm_source=footer>
.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental...@googlegroups.com
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/002c01d8a069%24f17e0dd0%24d47a2970%24%40mmnet.com.au
<https://groups.google.com/d/msgid/legacy-ornamental-mills/002c01d8a069%24f17e0dd0%24d47a2970%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental...@googlegroups.com
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/39fab85a-f87d-4349-96ae-6cdc0680993an%40googlegroups.com
<https://groups.google.com/d/msgid/legacy-ornamental-mills/39fab85a-f87d-4349-96ae-6cdc0680993an%40googlegroups.com?utm_medium=email&utm_source=footer>
.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental...@googlegroups.com
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/112e350e-f4e5-4462-b4b1-f1b6b335c7d9n%40googlegroups.com
<https://groups.google.com/d/msgid/legacy-ornamental-mills/112e350e-f4e5-4462-b4b1-f1b6b335c7d9n%40googlegroups.com?utm_medium=email&utm_source=footer>
.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/76af9b50-e0d5-4544-8c5c-8d3ed8ed4eban%40googlegroups.com
<https://groups.google.com/d/msgid/legacy-ornamental-mills/76af9b50-e0d5-4544-8c5c-8d3ed8ed4eban%40googlegroups.com?utm_medium=email&utm_source=footer>
.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d8a2f4%24281c4190%247854c4b0%24%40mmnet.com.au.
