I'm sure your system can works properly in some case, I don't know if it
could work in my case, I will think about it.
Any other idea will be welcome.
----- Original Message -----
From: Pekka Buttler <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, July 25, 2001 11:19 AM
Subject: RE: <lingo-l> Team collaboration
> I have another Idea for you.
>
> First off, Director is probably as unfriendly collaborative environment as
> it gets. I used to work in teams, where only 1 member of the team had
rights
> to touch the shared casts, which won't work if you want everyone to be
able
> to fully participate.
>
> The real option, which I've had to make use of once (I had my doubts, but
it
> worked brilliantly) in a rush project (although I admit that it is
> demanding) is to work in shifts.
> Shift 1 : 800-1700
> Shift 2 : 1600 - 0100
> Shift 3 : 0000 - 0900
> The overlapping time was used for briefing the next shift on what had to
be
> done. We changed Shifts every week, so that none would get his daily cycle
> too effed-up.
>
> In the end it fell apart and all three of us were there 24h/d, but at that
> time 2 guys were testing, and one was debugging...
>
> As I said, It don't work in all situations and with all kinds of people,
but
> you can always consider it. Naturally modifying this model for 2 shifts is
> quite possible...
>
> Pekka
>
>
>
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
> > Behalf Of Miguel Gonzalez
> > Sent: 25. heinäkuuta 2001 11:21
> > To: [EMAIL PROTECTED]
> > Subject: Re: <lingo-l> Team collaboration
> >
> >
> > I have this problem and we have decided work using MIAW, each one
> > can make a
> > movie and later all of them will work together. Each movie will have its
> > appropriate casts library's.
> >
> > Any other idea?
> >
> >
> > ----- Original Message -----
> > From: Victor Iwan <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Tuesday, July 24, 2001 7:50 PM
> > Subject: <lingo-l> Team collaboration
> >
> >
> > > Well, I used to work alone and now I learning to use director in a
team.
> > > Any suggestion how to manage team in director ? Can I add
'sub-project'
> > > in frame x in director ? I mean like insert 30 pre-built frame in
frame
> > > x.... How about cast member ? Can a frame behavior consist of many
> > > behavior ?
> > >
> > > Thanks...
> > > victor
> > >
> > >
> > > [To remove yourself from this list, or to change to digest mode, go to
> > > http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
> > > email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
> > > Lingo-L is for learning and helping with programming Lingo. Thanks!]
> > >
> > >
> >
> >
> > [To remove yourself from this list, or to change to digest mode, go to
> > http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
> > email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
> > Lingo-L is for learning and helping with programming Lingo. Thanks!]
> >
>
>
> [To remove yourself from this list, or to change to digest mode, go to
> http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
> email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
> Lingo-L is for learning and helping with programming Lingo. Thanks!]
>
>
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
Lingo-L is for learning and helping with programming Lingo. Thanks!]
