> -----Original Message----- > From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of > Brad Hinson > Sent: Monday, April 14, 2008 12:38 PM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: FW: any help installing 4.4 for s390 (or s390x) on Z9-BC? > > Hi Kelly, > > Does dmesg show any qeth-related errors during bootup? Also, do you > get > any errors when you perform the steps manually? i.e: > > echo 0.0.e200,0.0.e201,0.0.e202 > /sys/bus/ccwgroup/drivers/qeth/group > echo 1 > /sys/bus/ccwgroup/drivers/qeth/0.0.e200/online > > Lastly, are you using the OSA in layer2 (OPTIONS='layer2=1' in > ifcfg-eth0) or layer3 (ARP=no in ifcfg-eth0) mode? > > -Brad > Brad, I don't see any qeth related messages at all when trying to boot the installed image, but it may be failing due to volume group errors before it gets that far. It lists all the DASD addresses, then panics after the "Activation logical volumes" message with: Kernel panic - not syncing: Attempted to kill init!
When trying to boot the installer via FTP, I get the messages below: Qeth: loading qeth S/390 OSA-Express driver Cat: /sys/devices/qeth/0.0.e200/if_name: No such file or directory SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device Thanks, -Kelly ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
