Are you coupling e200 to an osa? What does 'vmcp q nic' show (or #CP Q NIC at the VM console) .. ?
Scott On Mon, Apr 14, 2008 at 10:05 AM, Kelly F. Hickel <[EMAIL PROTECTED]> wrote: > Hmm, no responses? > > > -- > > Kelly F. Hickel > Senior Product Architect > MQSoftware, Inc. > 952-345-8677 Office > 952-345-8721 Fax > [EMAIL PROTECTED] > www.mqsoftware.com > SEE BUSINESS WORK > > > > -----Original Message----- > > From: Kelly F. Hickel > > Sent: Wednesday, April 09, 2008 9:18 AM > > To: Kelly F. Hickel; 'Linux on 390 Port' > > Cc: Ray Mullins > > Subject: RE: FW: any help installing 4.4 for s390 (or s390x) on Z9-BC? > > > > Here's a blast from the past, this has cropped up again. > > > > After a recent full shutdown of our z9, the linux lpar (Centos 4.4 > > s390x) wouldn't boot, seems like the root volume group may be "a bit > > off". So, I decided to try and boot from the installer image to see > if > > I could repair it, but when I use ht e0.0.0E200,0.0.E201,0.0.E202 addr > > for the qeth device (blank line for the portname, but I've also tried > > CHIP00), it fails to come up with the messages: > > > > Qeth: loading qeth S/390 OSA-Express driver > > Cat: /sys/devices/qeth/0.0.e200/if_name: No such file or directory > > SIOCSIFNETMASK: No such device > > SIOCSIFBRDADDR: No such device > > > > When I was having this problem last April during the initial install, > > it went away when the folks that set up the hardware suggested using > an > > OSA adapter that wasn't in use by any other LPARs, I've had folks > check > > and e200 still isn't being used by anything else. > > > > I have no idea how to even begin tracking down what the problem is, > > does anyone have any ideas? > > > > -- > > > > Kelly F. Hickel > > Senior Product Architect > > MQSoftware, Inc. > > 952-345-8677 Office > > 952-345-8721 Fax > > [EMAIL PROTECTED] > > www.mqsoftware.com > > SEE BUSINESS WORK > > > > > > > -----Original Message----- > > > From: Kelly F. Hickel > > > Sent: Monday, April 09, 2007 8:54 AM > > > To: Linux on 390 Port > > > Subject: RE: FW: any help installing 4.4 for s390 (or s390x) on Z9- > > BC? > > > > > > Brad, > > > I looked in there and didn't like what I saw, talked to one orf > > > the guys that configured the hardware, he said to try a different > OSA > > > that wasn't shared with Z/os, with addrs E200-E202, and that worked! > > > > > > Thanks everyone!! > > > > > > -- > > > > > > Kelly F. Hickel > > > Senior Software Architect > > > MQSoftware, Inc > > > 952.345.8677 > > > [EMAIL PROTECTED] > > > > > > > > > > -----Original Message----- > > > > From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf > > Of > > > > Brad Hinson > > > > Sent: Saturday, April 07, 2007 12:28 PM > > > > To: LINUX-390@VM.MARIST.EDU > > > > Subject: Re: FW: any help installing 4.4 for s390 (or s390x) on > Z9- > > > BC? > > > > > > > > [snip] > > > > > I've tried what you wrote above with the same results. As far > as > > > > the > > > > > addresses, I'm not positive, but that's what I was told. > > > Presumably > > > > > there's some way, using the HMC to verify the addrs for LP7, but > > I > > > > don't > > > > > know how, so if you could give me some pointers, that would be > > > > great. > > > > > > > > You'll have to check the device definitions in the IOCDS config > > > > (Single > > > > Object Operations -> CPC Config menu -> Input/Output Configuration > > -> > > > > Options[Export Source File]). In ours, we have this line: > > > > > > > > IODEVICE ADDRESS=(800,010),CUNUMBR=(0800),UNIT=OSA > > > > > > > > Which means there are 10 devices starting at base address 0800 > > > > (0800-0809). > > > > > > > > > > > > > > > ----------------------------------------------------------------- > > -- > > > - > > > > -- > > > > > For LINUX-390 subscribe / signoff / archive access instructions, > > > > > send email to [EMAIL PROTECTED] with the message: INFO > > LINUX- > > > > 390 or visit > > > > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > > > > > > > ------------------------------------------------------------------- > > -- > > > - > > > > For LINUX-390 subscribe / signoff / archive access instructions, > > > > send email to [EMAIL PROTECTED] with the message: INFO LINUX- > > 390 > > > > or visit > > > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
