>My diald configuration looks like this:
>
>mode ppp
>disconnect-timeout 10
>redial-timeout 10
>connect /sbin/ifup ppp0
>device /dev/modem
>speed 115200
>modem
>lock
>crtscts
>dynamic
>defaultroute
>include /usr/lib/diald/standard.filter
>fifo /dev/diald.ctl
>local 192.168.1.1
I would use something different than your LOCAL IP number, since I think it
may casue confusion. Use another thing on your network that is not use
(192.168.1.250 for example).
>remote 212.151.53.218
>
>----- End -----
>Comments:
>* /dev/modem is linked to the right com port.
>* The servers IP address is 192.168.1.1
________________________________________________________________
| |
| Jean-Michel Lacroix, Ph.D., Research Manager, Diagnostic Kits |
| Visible Genetics Inc. http://www.visgen.com |
| 700 Bay Street, Suite 1000 .--. |
| Toronto, Ontario M5G 1Z6 CANADA |o_o | |
| Tel: (416) 813-3240 ext: 4883 |:_/ | |
| Fax: (416) 813-3250 // \ \ |
| (| | ) |
| E-Mail: [EMAIL PROTECTED] /'_ _/`\ |
| Home page: http://home.ican.net/~lacroix (____)=(___/ |
|_______________________________________________________________|
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
