Hi,
...
> I have a linux server as dial-out and I am using IP Masquerade and Diald
> ver 0.99.1. I (and all users in my system) can start a connection
> to my ISP with "/sbin/ifup ppp0" and then surf on a client. But I can't
get
> Diald to work. When there is no connection on the server and I start a web
browser
> on a client, it never comes out on the Internet because the server never
> makes a connection. The modem is completly dead and no diods is flashing.
> Earlier I used a script (connect) which was placed in /etc/ppp/
> but I read somewhere that it wasn't necessary if I already got a proper
dialup
> connection (ppp0). I couldn't get this method to work either.
If your using tap, dont. diald does not do it right. Remove your "alias tap
" rows from your conf.moudles file and restart diald. (check with ifconfig)
...
> local 192.168.1.1
> remote 212.151.53.218
...
> * The servers IP address is 192.168.1.1
Dont use existing IP numbers, but use dummy adresses for both. Im not sure
that that is correct but it works.
...
> * When I configured IP Masquerade I also ran "echo "1" >
> /proc/sys/net/ipv4/ip_dynaddr" which, according to IP-Masquerade-HOWTO,
> supposed to help diald. Hmmmm...
Ive tried both with and without, works as well.
// Jarmo
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
