hi gang,
i'm trying to get linux on a zfmicro systemcard 5mx + lcd and touchscreen.
i've got bare linux running, now i'm trying to get x running. it doesn't.
i've managed to get x to start without exiting right away, and i get a
white outline on a black screen on the lcd panel, but nothing else.
it does not seem to respond to keyboard input such as <ctrl> <alt> <backspace>
to exit the x server.
i haven't even begun to look for a driver for the touch panel.
the video chip is the mediagx
the touch screen is based on the ELO E271-Coach touchscreen controller
this is what startx says, other than the usual stuff of what chips
are supported and what modes are being removed:
(**) SVGA: Mode "1280x1024": mode clock = 80.000
(--) SVGA: Display pitch set to 2048
(--) SVGA: Virtual resolution set to 1280x1024
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: No room for hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (TE imagetext, TE polytext)
(--) SVGA: Pixmap cache disabled - no video memory available
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
1. any ideas or suggestions as to how i can get x running?
2. any ideas of where i might find the touch screen driver?
3. has anyone else had linux+X running on one of these, or a similar board?
thanks,
michael
--
To unsubscribe from this list, send a message to [EMAIL PROTECTED]
with the command "unsubscribe linux-embedded" in the message body.
For more information, see <http://waste.org/mail/linux-embedded>.
