Pavel and others:
thanks for all your help. i was able to get the touchscreen working very
nicely. can't say the same for the lcd; i'm unable to control the display
very much; i found an XF86Config file that works but almost any changes
i make to it cause the machine to crash.
i can't say i'm very impressed with the support from zfmicro. they
claim to support linux but it took them a long time to find answers
to my questions; in most cases, by the time they got back to me i'd
already found the answer on the web. they did send me a couple of
XF86Config files which either didn't change anything or worse,
caused the machine to crash.
i'm rather suprised; have other people had better experience with them?
i'd like to hear that they are really wonderful and this is just a fluke,
but unless i'm convinced otherwise, i'm going to return the 5MX board
and go with a different manufacturer.
thanks,
michael
> >i do have the elo driver installed.
>
>You mean, xf86Elo.so? It's not exactly the driver, it's
>XInput extension which reads data from the real driver
>than converts it into "mouse" events and sends to X.
>
>If controller attached to the serial port xf86Elo will use
>serial port driver as input and so doesn't need special
>touch driver.
>
> >here is the relevent section from my XF86config file:
> <snip>
> >Section "Pointer"
> > Protocol "Microsoft"
> > Device "/dev/ttyS1"
> ^^^^^^^^^^^^^^
--
To unsubscribe from this list, send a message to [EMAIL PROTECTED]
with the command "unsubscribe linux-embedded" in the message body.
For more information, see <http://waste.org/mail/linux-embedded>.
