on 17/11/2000 13:27, Christian Gennerat at
[EMAIL PROTECTED] typed:
>
>
> Guy Plunkett a �crit :
>
>> if I do pilot-xfer /dev/ircomm0 -l
>>
>> The pilot does not connect... I've set the pilot to 9600 and also the
> sever
>> with PILOTRATE=9600.
>>
>
> Now, we are talking about irda!
>
> have you a recent pilot-link? I use pilot-link-0.9.3-10mdk
> and generally not in the command line, but via jpilot
> or star-office (5.2)
> Your Palm-Pilot must have palm-os >= 3.3
> and then you can specify irda an run HostSync.
>
>
>
> _______________________________________________
> Linux-IrDA mailing list - [EMAIL PROTECTED]
> http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
>
hehe
ok...
I'm running pilot-link 0.9.4 and I've a Palm Vx 3.5.2
I'm driving it direct for the moment, but once I've got the basics working
I'm going to network hotsync.. and all sorts...
may even release some code :-)
I should point out that the IRDA interface on my server is an MA-600 which
plugs into the serial port... ttyS1
Thanks
-- Guy
------------------------------------------
Guy Plunkett Bsc (Hons), CLP ICQ:61446480
Systems Support Engineer --> Mac, UNIX, PC
ABC Solutions -> http://www.abcworks.co.uk
Tel: +441582 461040 -- Fax: +441582 461742
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
