-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Bonjour,
J'ai tenté de rajouter un second disque dans ma station HP XAs, mais alors je ne peux plus booter. En effet, le boot se fait alors sur le nouveau disque, au lieu de l'ancien où se trouve LILO. J'ai pourtant défini dans le BIOS que je voulais booter sur le disque d'origine. Le second disque est branché sur une carte Adaptec 2940 Ultra2 SCSI. J'utilise Debian Testing. yann@cray:~$ uname -a Linux cray 2.4.18-686 #1 Sun Apr 14 11:32:47 EST 2002 i686 Pentium II (Deschutes) GenuineIntel GNU/Linux Extrait de dmesg: SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 2, device 4, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c875 detected with Symbios NVRAM sym53c875-0: rev 0x26 on pci bus 2 device 4 function 0 irq 18 sym53c875-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking sym53c875-0: on-chip RAM at 0xfcffe000 sym53c875-0: restart (scsi reset). sym53c875-0: Downloading SCSI SCRIPTS. scsi0 : sym53c8xx-1.7.3c-20010512 Vendor: SEAGATE Model: ST39140W Rev: 1444 Type: Direct-Access ANSI SCSI revision: 02 Vendor: HP Model: CD-ROM CD32X Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 sym53c875-0-<0,0>: tagged command queue depth set to 4 scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 <Adaptec 2940 Ultra2 SCSI adapter> aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs Journalled Block Device driver loaded Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 sym53c875-0-<0,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 15) SCSI device sda: 17783240 512-byte hdwr sectors (9105 MB) Partition check: /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 > yann@cray:~$ lilo -v Password: LILO version 22.3.3, Copyright (C) 1992-1998 Werner Almesberger Development beyond version 21 Copyright (C) 1999-2002 John Coffman Released 30-Aug-2002 and compiled at 15:38:21 on Sep 1 2002. Reading boot sector from /dev/sda Using MENU secondary loader Calling map_insert_data Boot image: /boot/vmlinuz-2.2.20 Added 2.2.20 Boot image: /boot/vmlinuz-2.4.18-686 Mapping RAM disk /boot/initrd -> initrd.img-2.4.18-686 Added 2.4.18 * /boot/boot.0800 exists - no backup copy made. Writing boot sector. Qq a une idée ? Merci, Yann - -- http://www.forget-me.net Alternatives sur le Net http://keys.indymedia.org/showkey.py?key=0A34CBDA gpg --keyserver keys.indymedia.org --recv-key 0A34CBDA -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+NRPsm4KYjQo0y9oRAm1jAJ0RS+uhaEXWhlKUeA2LyVk9WRCosACfV0w8 LEHrQZ/99PCnOqAutAt0M8Q= =I9x4 -----END PGP SIGNATURE----- -- http://www-internal.alphanet.ch/linux-leman/ avant de poser une question. Ouais, pour se désabonner aussi.