On 4/17/25 8:12 AM, Gokul Sriram Palanisamy wrote: > From: Manikanta Mylavarapu <[email protected]> > > Enable nodes required for q6 remoteproc bring up. > > Signed-off-by: Manikanta Mylavarapu <[email protected]> > Signed-off-by: Gokul Sriram Palanisamy <[email protected]> > --- > changes since v3: > - added necessary padding for 8digt hex address in dts > - fixed firmware-name to use .mbn format > > arch/arm64/boot/dts/qcom/ipq5332.dtsi | 64 ++++++++++++++++++++++++++- > 1 file changed, 63 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi > b/arch/arm64/boot/dts/qcom/ipq5332.dtsi > index 69dda757925d..fc120fd8b274 100644 > --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi > @@ -2,7 +2,7 @@ > /* > * IPQ5332 device tree source > * > - * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights > reserved. > + * Copyright (c) 2022-2025 Qualcomm Innovation Center, Inc. All rights > reserved. > */ > > #include <dt-bindings/clock/qcom,apss-ipq.h> > @@ -146,6 +146,11 @@ smem@4a800000 { > > hwlocks = <&tcsr_mutex 3>; > }; > + > + q6_region: wcss@4a900000 { > + reg = <0x0 0x4a900000 0x0 0x2b00000>; > + no-map; > + }; > }; > > soc@0 { > @@ -545,6 +550,39 @@ frame@b128000 { > status = "disabled"; > }; > }; > + > + q6v5_wcss: remoteproc@d100000 { > + compatible = "qcom,ipq5332-wcss-sec-pil"; > + reg = <0x0d100000 0x4040>;
This is 0x10_000-long > + firmware-name = "ath12k/IPQ5332/hw1.0/q6_fw0.mbn"; Is the firmware OEM signed? Konrad
