On 5/15/25 10:15 AM, Dmitry Baryshkov wrote:
> On Thu, May 15, 2025 at 09:46:50AM +0530, Gokul Sriram P wrote:
>>
>> On 4/26/2025 1:53 AM, Konrad Dybcio wrote:
>>> On 4/17/25 8:12 AM, Gokul Sriram Palanisamy wrote:
>>>> From: Manikanta Mylavarapu <[email protected]>
>>>>
>>>> Enable nodes required for q6 remoteproc bring up.
>>>>
>>>> Signed-off-by: Manikanta Mylavarapu <[email protected]>
>>>> Signed-off-by: Gokul Sriram Palanisamy <[email protected]>
>>>> ---
>>>> changes since v3:
>>>>         - added necessary padding for 8digt hex address in dts 
>>>>         - fixed firmware-name to use .mbn format
>>>>
>>>>  arch/arm64/boot/dts/qcom/ipq5332.dtsi | 64 ++++++++++++++++++++++++++-
>>>>  1 file changed, 63 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi 
>>>> b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>>> index 69dda757925d..fc120fd8b274 100644
>>>> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>>> @@ -2,7 +2,7 @@
>>>>  /*
>>>>   * IPQ5332 device tree source
>>>>   *
>>>> - * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights 
>>>> reserved.
>>>> + * Copyright (c) 2022-2025 Qualcomm Innovation Center, Inc. All rights 
>>>> reserved.
>>>>   */
>>>>  
>>>>  #include <dt-bindings/clock/qcom,apss-ipq.h>
>>>> @@ -146,6 +146,11 @@ smem@4a800000 {
>>>>  
>>>>                    hwlocks = <&tcsr_mutex 3>;
>>>>            };
>>>> +
>>>> +          q6_region: wcss@4a900000 {
>>>> +                  reg = <0x0 0x4a900000 0x0 0x2b00000>;
>>>> +                  no-map;
>>>> +          };
>>>>    };
>>>>  
>>>>    soc@0 {
>>>> @@ -545,6 +550,39 @@ frame@b128000 {
>>>>                            status = "disabled";
>>>>                    };
>>>>            };
>>>> +
>>>> +          q6v5_wcss: remoteproc@d100000 {
>>>> +                  compatible = "qcom,ipq5332-wcss-sec-pil";
>>>> +                  reg = <0x0d100000 0x4040>;
>>> This is 0x10_000-long
>>>
>>>> +                  firmware-name = "ath12k/IPQ5332/hw1.0/q6_fw0.mbn";
>>> Is the firmware OEM signed?
>>>
>> No. This isn't OEM signed. userPD firmwares will only be OEM signed.
> 
> Indeed, it contains only Qualcomm / QTI signature, OEM signature is not
> present.

Good, thanks for confirming

with the size changed

Reviewed-by: Konrad Dybcio <[email protected]>

Konrad


Reply via email to