On 4/26/2025 1:53 AM, Konrad Dybcio wrote: > On 4/17/25 8:12 AM, Gokul Sriram Palanisamy wrote: >> From: Manikanta Mylavarapu <[email protected]> >> >> Enable nodes required for q6 remoteproc bring up. >> >> Signed-off-by: Manikanta Mylavarapu <[email protected]> >> Signed-off-by: Gokul Sriram Palanisamy <[email protected]> >> --- >> changes since v3: >> - added necessary padding for 8digt hex address in dts >> - fixed firmware-name to use .mbn format >> >> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 64 ++++++++++++++++++++++++++- >> 1 file changed, 63 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi >> b/arch/arm64/boot/dts/qcom/ipq5332.dtsi >> index 69dda757925d..fc120fd8b274 100644 >> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi >> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi >> @@ -2,7 +2,7 @@ >> /* >> * IPQ5332 device tree source >> * >> - * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights >> reserved. >> + * Copyright (c) 2022-2025 Qualcomm Innovation Center, Inc. All rights >> reserved. >> */ >> >> #include <dt-bindings/clock/qcom,apss-ipq.h> >> @@ -146,6 +146,11 @@ smem@4a800000 { >> >> hwlocks = <&tcsr_mutex 3>; >> }; >> + >> + q6_region: wcss@4a900000 { >> + reg = <0x0 0x4a900000 0x0 0x2b00000>; >> + no-map; >> + }; >> }; >> >> soc@0 { >> @@ -545,6 +550,39 @@ frame@b128000 { >> status = "disabled"; >> }; >> }; >> + >> + q6v5_wcss: remoteproc@d100000 { >> + compatible = "qcom,ipq5332-wcss-sec-pil"; >> + reg = <0x0d100000 0x4040>; > This is 0x10_000-long > >> + firmware-name = "ath12k/IPQ5332/hw1.0/q6_fw0.mbn"; > Is the firmware OEM signed? > No. This isn't OEM signed. userPD firmwares will only be OEM signed.
Regards, Gokul
