Don Lafontaine VE2UFO wrote:
> > 1) must work with both NT and Linux, in the event that I
> > ever boot to NT again (rare but those damm word files make me do
> > it) not reading then writing them..
> > 2) easy to configure under both Linux and NT
> > 3) 10 to 15 minutes reserve power .. my power just flashes
> > occasionally, but has gone out for several hours
> > 4) if power goes out the system must know that power is
> > gone and shut itself down (apmd? or some dameon)
> > 5) must be SMP friendly (shouldn't make a difference)
> > 6) around $100..
I'm using an APC Smartups 700 here. Plugged in the serial cable,
downloaded an rpm of smupsd and made a symbolic link from /dev/ttyS0 to
/dev/ups and it worked without any problems whatsoever !!!
It had around 30 minutes of power before it shut down (happens when
it's at 40%...you can set it manually)....
However the prize was around 300 $ (2000 kr)...
best regards
Christian
--
Christian Ejstrup, RF Development Engineer/ IT- Administrator.
ATL Research A/S,Sofiendalsvej 85,DK-9200 Aalborg SV,Denmark
Phone:+45 96346868, Phone(direct):+45 96346860, GSM:+45 22234304
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
