Can you also post the contents of /proc/bus/usb/devices with it plugged in?
On Sat, 25 Jun 2005, Javier-Elias Vasquez-Vivas wrote: > OK, so I didn't know I was not doing it the right way... Sorry for > the previous post, I just wanted to bold the options I've always > used... > > Any ways, if you notice usb-storage seems to be enabled as a module isn't it? > > CONFIG_USB_STORAGE=m > > Is that all required? If so, then I'm missing something still, since > I tried mounting a cd under the untit as I usually do, but didn't > work, it says scd0 is not a device or something like that (I'll post > the exact error later), and it was the one I used to mount cds on for > the usb cd-writer... > > This always worked with hotplug, maybe now that I don't have this > option I used I have to configure something I didn't need to before... > > Can you please let me know? > > Thx, > > Javier. > > > On 6/25/05, Stephen J. Gowdy <[EMAIL PROTECTED]> wrote: > > Hi Javier, > > (BTW, your post didn't make it to the list due to having an HTML > > attachment). > > That option is to support nonstandard devices. Perhaps it wasn't > > needed anymore and removed? Have you tried using usb-storage? > > > > regards, > > > > Stephen. > > > > On Sat, 25 Jun 2005, Javier-Elias Vasquez-Vivas wrote: > > > > > So I'm confused. Please take a look at the config file for > > > 2.6.11.10<http://2.6.11.10>(USB storage section): > > > > > > ONFIG_USB_STORAGE=m > > > # CONFIG_USB_STORAGE_DEBUG is not set > > > # CONFIG_USB_STORAGE_RW_DETECT is not set > > > # CONFIG_USB_STORAGE_DATAFAB is not set > > > # CONFIG_USB_STORAGE_FREECOM is not set > > > # CONFIG_USB_STORAGE_ISD200 is not set > > > # CONFIG_USB_STORAGE_DPCM is not set > > > CONFIG_USB_STORAGE_HP8200e=y > > > # CONFIG_USB_STORAGE_SDDR09 is not set > > > # CONFIG_USB_STORAGE_SDDR55 is not set > > > # CONFIG_USB_STORAGE_JUMPSHOT is not set > > > > > > Now take a look at the config file for 2.6.12: > > > > > > CONFIG_USB_STORAGE=m > > > # CONFIG_USB_STORAGE_DEBUG is not set > > > # CONFIG_USB_STORAGE_DATAFAB is not set > > > # CONFIG_USB_STORAGE_FREECOM is not set > > > # CONFIG_USB_STORAGE_ISD200 is not set > > > # CONFIG_USB_STORAGE_DPCM is not set > > > # CONFIG_USB_STORAGE_USBAT is not set > > > # CONFIG_USB_STORAGE_SDDR09 is not set > > > # CONFIG_USB_STORAGE_SDDR55 is not set > > > # CONFIG_USB_STORAGE_JUMPSHOT is not set > > > > > > Again, I don't see the HP8200e option fo 2.6.12. So I don't know what I'm > > > missing.. Could it be that I'm missing a new option necessary for the hp > > > driver to show up? I doubt it since I have the scsi options required > > > enabled... > > > > > > Please let me know what I'm doing wrong, I'm also attaching the full > > > config > > > files... > > > > > > Javier. > > > > > > > > > > > > On 6/25/05, Stephen J. Gowdy <[EMAIL PROTECTED]> wrote: > > > > There are no changes between 2.6.12 and 2.6.12.1 <http://2.6.12.1> that > > > would make any > > > > difference to this. Did you perhaps have SCSI off during the config > > > > step? > > > > > > > > On Sat, 25 Jun 2005, Javier-Elias Vasquez-Vivas wrote: > > > > > > > > > I wanted to turn it on when "make menuconfig", but it wasn't there. > > > > > I'll try with 2.6.12.1 <http://2.6.12.1> then which is the one you > > > mentioned includes > > > > > it... > > > > > > > > > > Thanks, > > > > > > > > > > Javier. > > > > > > > > > > > > > > > On 6/25/05, Stephen J. Gowdy <[EMAIL PROTECTED]> wrote: > > > > > > It is still there in 2.6.12.1 <http://2.6.12.1>. Did you perhaps not > > > turn it on? I assume > > > > > > you are talking about usb-storage? > > > > > > > > > > > > On Sat, 25 Jun 2005, Javier-Elias Vasquez-Vivas wrote: > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > Until kernel 2.6.11.10 <http://2.6.11.10> I always enabled a mass > > > storage module for my > > > > > > > hp8200e usb cd-writer, and it always worked pretty nice. I updated > > > to > > > > > > > from kernel 2.6.11.10 <http://2.6.11.10> to kernel 2.6.12 > > > > > > > yesterday, > > > and the module was > > > > > > > no longer available. > > > > > > > > > > > > > > Could it be that the module has been obsoleted or something? If > > > > > > > so, > > > > > > > what alternatives are out there to still use hp8200e usb cd-writer > > > > > > > under newer kernels? Would it be that there' s separate dirver now > > > > > > > available, not from the kernel itself? If so, could any one please > > > > > > > direct me to it? > > > > > > > > > > > > > > Thx, > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > /------------------------------------+-------------------------\ > > > > > > |Stephen J. Gowdy | SLAC, MailStop 34, | > > > > > > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > > > > > > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > > > > > > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > > > > > \------------------------------------+-------------------------/ > > > > > > > > > > > > > -- > > > > /------------------------------------+-------------------------\ > > > > |Stephen J. Gowdy | SLAC, MailStop 34, | > > > > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > > > > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > > > > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > > > \------------------------------------+-------------------------/ > > > > > > > -- > > /------------------------------------+-------------------------\ > > |Stephen J. Gowdy | SLAC, MailStop 34, | > > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > \------------------------------------+-------------------------/ > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
