Hallo,
folgender Stand derzeit:
* ich kann auf dem Rechner, auf dem Windows 10 installiert wurde (mit
reg patch, Domainbeitritt, nicht aktiviert), ein Image erstellen und
dieses auch neu+syncen. Danach startet alles wie gehabt.
* wenn ich dieses Image auf einen anderen baugleichen Rechner übertrage,
kann er Windows scheinbar syncen, aber Linbo kann es nicht starten. Ich
habe die log-Dateien des Clients und des Masters mal angehängt. Da sind
einige Fehlermeldungen drin, aber ich weiß nicht, ob sie relevant sind, z.B.
NTFS signature is missing.
Failed to mount '/dev/sda': Invalid argument
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Aber das steht sowohl beim Master als auch beim Client. Einzig am Ende
scheint es kleine Unterschiede zu geben.
* wenn ich Windows direkt aus Grub heraus starte, dann kommt die
Reparaturfehlermeldung.
* Ich würde gern mal eine Windows 10 (mit oder ohne dual boot) EFI
start.conf als Vergleich anschauen wollen. Vielleicht habe ich ja dort
noch irgendeinen Fehler. Wer könnte mir mal so eine start.conf
zuschicken? Meine (veränderte) habe ich noch mal angehängt.
* wenn ich den Master neu partitioniere, dann habe ich die gleichen
Probleme, d.h. Windows startet nicht mehr mit Linbo oder nur im Repair Mode.
So langsam überlege ich mir, ob ich dieses Windows nicht einfach lassen
soll...
vG Stephan
Am 14.07.2016 um 19:50 schrieb zefanja:
> Hallo Holger,
>
>> Windows kann nur sehr eingeschränkt auf neue Hardware geklont werden.
>> Voraussetzungen, dass diese Meldung nicht kommt sind:
>> 1) gleicher Rechner (gleiche Hardware)
>> 2) Gleiche BIOS Version und VIOS Konfiguration
>
> Es handelt sich um exakt die gleiche Hardware (Dell Latitude Laptops).
> Deswegen wundert es mich ja so sehr. Am Dual-Boot wird es ja wohl nicht
> liegen?! Hast du zufällig eine funktionierende start.conf für Win10 +
> Ubuntu im Uefi-Modus mit der ich meine nochmal vergleichen könnte?
>
> Vielleicht sehe ich ja auch den Wald vor lauter Bäumen nicht mehr... ;)
>
> vG Stephan
> _______________________________________________
> linuxmuster-user mailing list
> linuxmuster-user@lists.linuxmuster.net
> https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user
>
## Log session begin: Tue Jul 19 11:39:25 ICT 2016 ##
## Hardware-Setup - Anfang ##
udevd[1424]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1425]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1426]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1427]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1428]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1429]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1430]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1431]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1436]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1433]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1437]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1438]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1439]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1440]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1441]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1442]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1446]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1449]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1447]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1450]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1443]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1444]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1448]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1445]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1451]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1452]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1456]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1459]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1455]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1462]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[971]: Process 'console-setup-tty /dev/tty1' failed with exit code 2.
udevd[1464]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1465]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1463]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1466]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1468]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1460]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1461]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1470]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1454]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1457]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1472]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[970]: Process 'console-setup-tty /dev/tty2' failed with exit code 2.
udevd[1467]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1471]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1458]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1474]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1473]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1475]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1477]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1476]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1478]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1483]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1480]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1486]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1487]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1488]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1482]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1485]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1484]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1481]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[974]: Process 'console-setup-tty /dev/tty3' failed with exit code 2.
udevd[1493]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1494]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1004]: Process 'console-setup-tty /dev/tty4' failed with exit code 2.
udevd[1496]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1489]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1495]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1492]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1497]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1502]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1501]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1503]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1491]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1498]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1504]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1500]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1508]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1506]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1512]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1499]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1005]: Process 'console-setup-tty /dev/tty5' failed with exit code 2.
udevd[1505]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1511]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1510]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1514]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1509]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1513]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1516]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1518]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1517]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1519]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1521]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[965]: Process 'console-setup-tty /dev/tty6' failed with exit code 2.
udevd[1526]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1523]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1525]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1520]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1528]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1522]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1532]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1524]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1530]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1527]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1533]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1534]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1540]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1529]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1531]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1538]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1537]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1536]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1539]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1535]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1542]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1541]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1543]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1546]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1547]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1544]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1545]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1549]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1548]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1550]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1551]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1552]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1553]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f8:ca:b8:53:ca:45
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
udevd[1554]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1556]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1555]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7242000
udevd[1561]: failed to execute '/lib/systemd/systemd-sysctl'
'/lib/systemd/systemd-sysctl --prefix=/net/ipv4/conf/eth0
--prefix=/net/ipv4/neigh/eth0 --prefix=/net/ipv6/conf/eth0
--prefix=/net/ipv6/neigh/eth0': No such file or directory
udevd[974]: Process '/lib/systemd/systemd-sysctl --prefix=/net/ipv4/conf/eth0
--prefix=/net/ipv4/neigh/eth0 --prefix=/net/ipv6/conf/eth0
--prefix=/net/ipv6/neigh/eth0' failed with exit code 2.
udevd[1563]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1564]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
udevd[1565]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 11 ports detected
udevd[1566]: failed to execute '/usr/sbin/obex-check-device'
'/usr/sbin/obex-check-device 1d6b 0002': No such file or directory
udevd[1567]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1568]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part sxs deso
sadm sds apst
scsi host0: ahci
udevd[1569]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
scsi host1: ahci
udevd[1573]: failed to execute '/usr/sbin/obex-check-device'
'/usr/sbin/obex-check-device 1d6b 0003': No such file or directory
ata1: SATA max UDMA/133 abar m2048@0xf7241000 port 0xf7241100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf7241000 port 0xf7241180 irq 42
udevd[1574]: failed to execute '/usr/sbin/obex-check-device'
'/usr/sbin/obex-check-device 1d6b 0002': No such file or directory
udevd[1576]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1577]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1578]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1579]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1580]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-8: new high-speed USB device number 2 using xhci_hcd
ata1: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 2294.688 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139aef754,
max_idle_ns: 440795211890 ns
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
udevd[1582]: failed to execute '/usr/sbin/obex-check-device'
'/usr/sbin/obex-check-device 8087 8001': No such file or directory
udevd[1583]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1584]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
input: AlpsPS/2 ALPS DualPoint Stick as
/devices/platform/i8042/serio1/input/input7
udevd[1585]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1586]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
usb 2-8: config 1 has an invalid interface number: 8 but max is 3
usb 2-8: config 1 has no interface number 1
input: AlpsPS/2 ALPS DualPoint TouchPad as
/devices/platform/i8042/serio1/input/input6
usb 2-8: config 2 has an invalid interface number: 12 but max is 1
usb 2-8: config 2 has an invalid interface number: 13 but max is 1
usb 2-8: config 2 has an invalid interface number: 13 but max is 1
usb 2-8: config 2 has no interface number 0
usb 2-8: config 2 has no interface number 1
udevd[1587]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1588]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1589]: failed to execute '/usr/sbin/obex-check-device'
'/usr/sbin/obex-check-device 413c 81b1': No such file or directory
udevd[1591]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1592]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1593]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1594]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1596]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: LITEON LCH-128V2S-11 2.5 7mm 128GB, FC7110C, max UDMA/133
ata2.00: 250069680 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA LITEON LCH-128V2 10C PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
udevd[1598]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 1:0:0:0: [sda] Attached SCSI disk
udevd[1599]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1600]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1601]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1602]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1603]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1604]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1605]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1607]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1606]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1609]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1608]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1610]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1611]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1612]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1614]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1617]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
udevd[968]: Process '/lib/udev/hdparm' failed with exit code 2.
udevd[1620]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1621]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1623]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1624]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1625]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1627]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
udevd[1626]: failed to execute '/bin/readlink' '/bin/readlink
/etc/udev/rules.d/80-net-setup-link.rules': No such file or directory
## Hardware-Setup - Ende ##
Installing for x86_64-efi platform.
grub-install: warning: cannot open directory `/usr/share/locale': No such file
or directory.
Installation finished. No error reported.
NTFS signature is missing.
Failed to mount '/dev/sda': Invalid argument
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
## Log session end: Tue Jul 19 11:39:25 ICT 2016 ##
## Log session begin: Tue Jul 19 11:42:41 ICT 2016 ##
Cluster size has been automatically set to 4096 bytes.
Creating NTFS volume structures.
mkntfs completed successfully. Have a nice day.
1+0 records in
1+0 records out
8 bytes (8B) copied, 0.000141 seconds, 55.4KB/s
## Log session end: Tue Jul 19 11:42:41 ICT 2016 ##
## Log session begin: Tue Jul 19 11:42:44 ICT 2016 ##
Stelle Windows-Bootdateien auf EFI-Partition wieder her.
Stelle EFI-Standardboot wieder her.
BootNext: 0004
BootCurrent: 0000
Timeout: 1 seconds
BootOrder: 0000,0001,0002,0003
Boot0000* grub
Boot0001* Onboard NIC(IPV4)
Boot0002* Onboard NIC(IPV6)
Boot0003* UEFI: LITEON LCH-128V2S-11 2.5 7mm 128GB
Boot0004* Windows Boot Manager
Setze EFI Bootreihenfolge auf Lokal,Netzwerk: 0000.
BootNext: 0004
BootCurrent: 0000
Timeout: 1 seconds
BootOrder: 0000
Boot0000* grub
Boot0001* Onboard NIC(IPV4)
Boot0002* Onboard NIC(IPV6)
Boot0003* UEFI: LITEON LCH-128V2S-11 2.5 7mm 128GB
Boot0004* Windows Boot Manager
Installiere GRUB in MBR/EFI von /dev/sda ... Installing for x86_64-efi platform.
grub-install: warning: cannot open directory `/usr/share/locale': No such file
or directory.
Installation finished. No error reported.
OK!
## Log session end: Tue Jul 19 11:42:44 ICT 2016 ##
## Log session begin: Tue Jul 19 11:53:08 ICT 2016 ##
GPT fdisk (gdisk) version 1.0.1
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help):
Expert command (? for help): Partition number (1-7): Enter the partition's new unique GUID ('R' to randomize): New GUID is 09A9CB91-3D29-4E3F-B847-B3D6D1D6F65C
Expert command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /dev/sda.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
## Log session end: Tue Jul 19 11:53:08 ICT 2016 ##
## Log session begin: Tue Jul 19 12:09:28 ICT 2016 ##
Cluster size has been automatically set to 4096 bytes.
Creating NTFS volume structures.
mkntfs completed successfully. Have a nice day.
1+0 records in
1+0 records out
8 bytes (8B) copied, 0.000096 seconds, 81.4KB/s
## Log session end: Tue Jul 19 12:09:28 ICT 2016 ##
## Log session begin: Tue Jul 19 12:09:31 ICT 2016 ##
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000,0002,0003
Boot0000* grub
Boot0002* Onboard NIC(IPV6)
Boot0003* UEFI: SK hynix SC300 2.5 7MM 128GB
Boot0004* Windows Boot Manager
Boot0005* Onboard NIC(IPV4)
Boot0006* Onboard NIC(IPV6)
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000,0003
Boot0000* grub
Boot0003* UEFI: SK hynix SC300 2.5 7MM 128GB
Boot0004* Windows Boot Manager
Boot0005* Onboard NIC(IPV4)
Boot0006* Onboard NIC(IPV6)
Stelle Windows-Bootdateien auf EFI-Partition wieder her.
Stelle EFI-Standardboot wieder her.
BootNext: 0004
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000,0003
Boot0000* grub
Boot0003* UEFI: SK hynix SC300 2.5 7MM 128GB
Boot0004* Windows Boot Manager
Boot0005* Onboard NIC(IPV4)
Boot0006* Onboard NIC(IPV6)
Setze EFI Bootreihenfolge auf Lokal,Netzwerk: 0000.
BootNext: 0004
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000
Boot0000* grub
Boot0003* UEFI: SK hynix SC300 2.5 7MM 128GB
Boot0004* Windows Boot Manager
Boot0005* Onboard NIC(IPV4)
Boot0006* Onboard NIC(IPV6)
Installiere GRUB in MBR/EFI von /dev/sda ... Installing for x86_64-efi platform.
grub-install: warning: cannot open directory `/usr/share/locale': No such file or directory.
Installation finished. No error reported.
OK!
## Log session end: Tue Jul 19 12:09:31 ICT 2016 ##
# LINBO start.conf Beispiel mit EFI (GPT)
# EFI 64 Partition 1
# MSR Partition 2
# Windows 10 Partition 3
# Ubuntu Partition 4
# Swap Partition 5
# Cache auf Partition 6
# Daten auf Partition 7
[LINBO] # globale Konfiguration
Server = 10.16.1.1 # IP des Linbo-Servers, der das Linbo-Repository
vorhaelt
Group = dell
# Achtung: Server und Group werden beim Workstationsimport automatisch gesetzt!
Cache = /dev/sda6 # lokale Cache Partition
RootTimeout = 600 # automatischer Rootlogout nach 600 Sek.
AutoPartition = no # automatische Partitionsreparatur beim LINBO-Start
AutoFormat = no # kein automatisches Formatieren aller Partitionen
beim LINBO-Start
AutoInitCache = no # kein automatisches Befuellen des Caches beim
LINBO-Start
DownloadType = rsync # Image-Download per torrent|multicast|rsync, default
ist rsync
BackgroundFontColor = white # Bildschirmschriftfarbe (default: white)
ConsoleFontColorStdout = lightgreen # Konsolenschriftfarbe (default: white)
ConsoleFontColorStderr = orange # Konsolenschriftfarbe fuer
Fehler-/Warnmeldungen (default: red)
SystemType = efi64 # moeglich ist bios|bios64|efi32|efi64
(Standard: bios fuer bios 32bit)
KernelOptions = quiet splash # Beispiele:
#KernelOptions = acpi=noirq irqpoll # LINBO Kerneloptionen (z. B. acpi=off), m.
Leerz. getrennt
#KernelOptions = server=10.16.1.5 # Abweichende Linbo-Server-IP als
Kerneloption gesetzt
# falls gesetzt wird diese IP beim
Workstationsimport verwendet
[Partition] # Partition fuer EFI
Dev = /dev/sda1 # Device-Name der Partition (sda1 = erste Partition
auf erster Platte)
Label = efi # Partitionslabel efi (efi system partition)
Size = 200M # Partitionsgroesse (Bsp.: 200M), ist keine Einheit
(M, G oder T) angegeben, wird kiB angenommen
Id = ef # Partitionstyp (83 = Linux, 82 = swap, c = FAT32, 7 =
NTFS, ef = efi)
FSType = vfat # Dateisystem auf der Partition (FAT32)
Bootable = yes # Bootable-Flag gesetzt
[Partition] # Partition fuer MSR
Dev = /dev/sda2 # Device-Name der Partition (sda2 = zweite Partition
auf erster Platte)
Label = msr # Partitionslabel msr (microsoft reserved partition)
Size = 128M # Partitionsgroesse 128M
Id = 0c01 # Partitionstyp 0c01
FSType = # kein Dateisystem
Bootable = no # kein Bootable-Flag
[Partition] # Partition fuer Windows
Dev = /dev/sda3 # Device-Name der Partition (sda3 = dritte Partition
auf erster Platte)
Label = win10 # Partitionslabel win7
Size = 40G # Partitionsgroesse 30G
Id = 7 # Partitionstyp 83
FSType = ntfs # Dateisystem ext4
Bootable = no # kein Bootable-Flag
[Partition] # Partition fuer Ubuntu
Dev = /dev/sda4 # Device-Name der Partition (sda4 = vierte Partition
auf erster Platte)
Label = ubuntu # Partitionslabel ubuntu
Size = 30G # Partitionsgroesse 30G
Id = 83 # Partitionstyp 83
FSType = ext4 # Dateisystem ext4
Bootable = no # kein Bootable-Flag
[Partition] # Swap-Partition
Dev = /dev/sda5 # Device-Name der Partition (sda5 = fuenfte Partition
auf erster Platte)
Label = swap # Partitionslabel swap
Size = 4G # Partitionsgroesse 4G
Id = 82 # Partitionstyp 82
FSType = swap # Dateisystem swap
Bootable = no # kein Bootable-Flag
[Partition] # Cache-Partition
Dev = /dev/sda6 # Device-Name der Partition (sda6 = sechste Partition
auf erster Platte)
Label = cache # Partitionslabel cache
Size = 40G # Partitionsgroesse 80G
Id = 83 # Partitionstyp 83
FSType = ext4 # Dateisystem ext4
Bootable = no # kein Bootable-Flag
[Partition] # Daten-Partition
Dev = /dev/sda7 # Device-Name der Partition (sda7 = siebte Partition
auf erster IDE-Platte)
Label = daten # Partitionslabel daten
Size = # Partitionsgroesse nicht angegeben = Rest der Platte
Id = 7 # Partitionstyp 7
FSType = ntfs # Dateisystem ntfs
Bootable = no # kein Bootable-Flag
[OS] # Beginn einer Betriebssystemdefinition
Name = Windows 10 # Name des Betriebssystems
Version = # Version (unbenutzt, leer lassen)
Description = Windows 10 Pro # Beschreibung
IconName = winxp.png # Icon für den Startbutton, muss unter
/var/linbo/icons abgelegt sein
Image = # differentielles Image (Erweiterung .rsync,
Verwendung nicht empfohlen)
BaseImage = win10.cloop # Dateiname des Basisimages (Erweiterung .cloop)
Boot = /dev/sda3 # Bootpartition (unbenutzt, immer gleich
Rootpartition)
Root = /dev/sda3 # Rootpartition, in die das BS installiert ist
Kernel = auto # Windows: auto (LINBO & Grub erkennen die
Startparameter automatisch)
Initrd = # Windows: leer
Append = # Windows: leer
StartEnabled = yes # "Start"-Button anzeigen
SyncEnabled = yes # "Sync+Start"-Button anzeigen
NewEnabled = yes # "Neu+Start"-Button anzeigen
Autostart = no # automatischer Start des Betriebssystems (yes|no)
AutostartTimeout = 5 # Timeout in Sekunden für Benutzerabbruch bei
Autostart
DefaultAction = start # Standardaktion bei Autostart: start|sync|new
Hidden = yes # verstecke OS-Reiter (unbenutzte Option, auf
"yes" lassen)
[OS]
Name = Ubuntu # Name des Betriebssystems
Version = # Version (unbenutzt, leer lassen)
Description = Ubuntu 16.04 Trusty # Beschreibung
IconName = ubuntu.png # Icon für den Startbutton, muss unter
/var/linbo/icons abgelegt sein
Image = # differentielles Image (Erweiterung .rsync,
Verwendung nicht empfohlen)
BaseImage = xenial.cloop # Dateiname des Basisimages (Erweiterung
.cloop)
Boot = /dev/sda4 # Bootpartition (unbenutzt, immer gleich
Rootpartition)
Root = /dev/sda4 # Rootpartition, in die das BS installiert ist
Kernel = vmlinuz # Relativer Pfad zum Kernel
Initrd = initrd.img # Relativer Pfad zur Initrd
Append = ro splash # Kernel-Append-Parameter, ggf. anpassen
StartEnabled = yes # "Start"-Button anzeigen
SyncEnabled = yes # "Sync+Start"-Button anzeigen
NewEnabled = yes # "Neu+Start"-Button anzeigen
Autostart = no # automatischer Start des Betriebssystems
(yes|no)
AutostartTimeout = 5 # Timeout in Sekunden für Benutzerabbruch bei
Autostart
DefaultAction = sync # Standardaktion bei Autostart: start|sync|new
Hidden = yes # verstecke OS-Reiter (unbenutzte Option, auf
"yes" lassen)
_______________________________________________
linuxmuster-user mailing list
linuxmuster-user@lists.linuxmuster.net
https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user
