linuxppc-embedded  

Messages by Thread

• • Re: The question about the high memory support on MPC8360? 郭劲
  • Re: The question about the high memory support on MPC8360? vijay baskar
  • Re: The question about the high memory support on MPC8360? robert lazarski
  • Re: The question about the high memory support on MPC8360? Dale Farnsworth
  • RE: The question about the high memory support on MPC8360? Rune Torgersen
• The question about the UART on UCC5,UCC6,UCC7,UCC8 for MPC8360? 郭劲
  • Re: The question about the UART on UCC5,UCC6,UCC7,UCC8 for MPC8360? Timur Tabi
• List of Device Bandwidths narendra sisodiya
• SPI, I2C David H. Lynch Jr.
  • RE: SPI, I2C Stephen Neuendorffer
• SPI driver for spi_mpc83xx fabio777
  • Re: SPI driver for spi_mpc83xx Ben Warren
• PCI to Parallel for PowerPC Bai Shuwei
  • Re: PCI to Parallel for PowerPC Clemens Koller
  • Re: PCI to Parallel for PowerPC Benjamin Herrenschmidt
• [EMAIL PROTECTED];[EMAIL PROTECTED];[EMAIL PROTECTED] Bai Shuwei
• Xilinx devicetrees David H. Lynch Jr.
  • Re: Xilinx devicetrees Grant Likely
  • RE: Xilinx devicetrees Stephen Neuendorffer
  • Re: Xilinx devicetrees David H. Lynch Jr.
  • RE: Xilinx devicetrees Stephen Neuendorffer
  • Re: Xilinx devicetrees John Williams
  • Re: Xilinx devicetrees Grant Likely
  • RE: Xilinx devicetrees Stephen Neuendorffer
  • Re: Xilinx devicetrees John Williams
  • Re: Xilinx devicetrees Jon Loeliger
  • RE: Xilinx devicetrees Stephen Neuendorffer
  • Re: Xilinx devicetrees Grant Likely
  • Re: Xilinx devicetrees David H. Lynch Jr.
  • Re: Xilinx devicetrees David H. Lynch Jr.
  • Re: Xilinx devicetrees Grant Likely
  • Re: Xilinx devicetrees David H. Lynch Jr.
  • RE: Xilinx devicetrees Stephen Neuendorffer
  • Re: Xilinx devicetrees David H. Lynch Jr.
  • RE: Xilinx devicetrees Koss, Mike (Mission Systems)
  • Re: Xilinx devicetrees Grant Likely
  • Re: Xilinx devicetrees David H. Lynch Jr.
  • Re: Xilinx devicetrees David H. Lynch Jr.
  • RE: Xilinx devicetrees Stephen Neuendorffer
  • Re: Xilinx devicetrees Grant Likely
  • RE: Xilinx devicetrees Koss, Mike (Mission Systems)
  • RE: Xilinx devicetrees Stephen Neuendorffer
  • RE: Xilinx devicetrees Koss, Mike (Mission Systems)
  • RE: Xilinx devicetrees Stephen Neuendorffer
• Linux on ML310 narendra sisodiya
  • Re: Linux on ML310 Grant Likely
  • Re: Linux on ML310 narendra sisodiya
• MontaVista 4.0.1 on Xilinx ML405 board gsk19
  • Re: MontaVista 4.0.1 on Xilinx ML405 board schardt
• How to map addresses beyond 4GB Dell Query
  • Re: How to map addresses beyond 4GB Dan Malek
  • Re: How to map addresses beyond 4GB Dell Query
• cant' compile busybox-1.8.1 with eldk 4.1 fabien
  • Re: cant' compile busybox-1.8.1 with eldk 4.1 Clemens Koller
  • Re: cant' compile busybox-1.8.1 with eldk 4.1 fabien
  • Re: cant' compile busybox-1.8.1 with eldk 4.1 Wolfgang Denk
  • Re: cant' compile busybox-1.8.1 with eldk 4.1 fabien
• Initramfs problem on virtex4fx schardt
  • Re: Initramfs problem on virtex4fx schardt
  • Re: Initramfs problem on virtex4fx David H. Lynch Jr.
• #PPC: timeout while waiting for freeze Bheemappa
  • #PPC: timeout while waiting for freeze Bheemappa
• Firmware Support for USB Hub Misbah khan
  • Re: Firmware Support for USB Hub Scott Wood
  • Re: Firmware Support for USB Hub Laurent Pinchart
  • Re: Firmware Support for USB Hub Misbah khan
  • Re: Firmware Support for USB Hub Clemens Koller
  • Re: Firmware Support for USB Hub Misbah khan
  • Re: Firmware Support for USB Hub Misbah khan
  • Re: Firmware Support for USB Hub Laurent Pinchart
• Debugging with gdbserver slow khollan
  • Re: Debugging with gdbserver slow khollan
  • Re: Debugging with gdbserver slow khollan
• linux2.6.19.2-> mpc8xx_wdt.c: timeout extended to reach several seconds... but I have a problem DI BACCO ANTONIO - technolabs
  • Re: linux2.6.19.2-> mpc8xx_wdt.c: timeout extended to reach several seconds... but I have a problem Jochen Friedrich
• [PATCH] powerpc: Change _tlbie arguments to reflect new API Jochen Friedrich
  • Re: [PATCH] powerpc: Change _tlbie arguments to reflect new API Josh Boyer
• [PATCH try2] powerpc: Add support for PORTA and PORTB odr registers Jochen Friedrich
  • Re: [PATCH try2] powerpc: Add support for PORTA and PORTB odr registers Scott Wood
• ML403 USB driver Lorenz Kolb
  • Re: ML403 USB driver Grant Likely
  • Re: ML403 USB driver Lorenz Kolb
  • Re: ML403 USB driver Peter Korsgaard
  • Re: ML403 USB driver Grant Likely
• Looking for small form factor with HDLC Kenneth Porter
• Re: 2.6 kernel hangs after loading device tree abhi_linux
  • Re: 2.6 kernel hangs after loading device tree Clemens Koller
  • Re: 2.6 kernel hangs after loading device tree charanya venkatraman
• Problem with 64-bit variables on ppc405 Mirek23
  • Re: Problem with 64-bit variables on ppc405 David Hawkins
• How can I make the DDR momory storage bigger than 256M? 郭劲
  • RE: How can I make the DDR momory storage bigger than 256M? Liu Dave
• Oops: of_platform_serial_probe Clemens Koller
  • Re: Oops: of_platform_serial_probe Timur Tabi
  • Re: Oops: of_platform_serial_probe Clemens Koller
  • Re: Oops: of_platform_serial_probe Timur Tabi
  • Re: Oops: of_platform_serial_probe Arnd Bergmann
  • Re: Oops: of_platform_serial_probe Clemens Koller
  • Re: Oops: of_platform_serial_probe Arnd Bergmann
  • Re: Oops: of_platform_serial_probe Clemens Koller
• about xeno_hal modules zhangwei zhang
• MPC880: i2cer register says tx is done but tx buf descriptor is still ready DI BACCO ANTONIO - technolabs
  • Re: MPC880: i2cer register says tx is done but tx buf descriptor is still ready Jochen Friedrich
  • RE: MPC880: i2cer register says tx is done but tx buf descriptor is still ready DI BACCO ANTONIO - technolabs
  • Re: MPC880: i2cer register says tx is done but tx buf descriptor is still ready Ankur Maheshwari
• multiprocessor keng_629
  • Re: multiprocessor Grant Likely
  • Re: Re: multiprocessor keng_629
• 85xx software reset problems from paulus.git robert lazarski
  • Re: 85xx software reset problems from paulus.git Clemens Koller
  • Re: 85xx software reset problems from paulus.git robert lazarski
  • Re: 85xx software reset problems from paulus.git robert lazarski
  • Re: 85xx software reset problems from paulus.git Kumar Gala
  • Re: 85xx software reset problems from paulus.git robert lazarski
  • Re: 85xx software reset problems from paulus.git Kumar Gala
  • Re: 85xx software reset problems from paulus.git robert lazarski
  • Re: 85xx software reset problems from paulus.git Clemens Koller
  • Re: 85xx software reset problems from paulus.git Kumar Gala
  • Re: 85xx software reset problems from paulus.git Dale Farnsworth
  • Re: 85xx software reset problems from paulus.git Dale Farnsworth
  • Re: 85xx software reset problems from paulus.git Kumar Gala
  • Re: 85xx software reset problems from paulus.git Dale Farnsworth
• hangs after "Freeing unused kernel memory" Siva Prasad
  • Re: hangs after "Freeing unused kernel memory" Gerhard Pircher
  • Re: hangs after "Freeing unused kernel memory" Linas Vepstas
  • RE: hangs after "Freeing unused kernel memory" Siva Prasad
• Latest paulus.git PCI broken on mpc8540? Clemens Koller
  • Re: Latest paulus.git PCI broken on mpc8540? Kumar Gala
  • Re: Latest paulus.git PCI broken on mpc8540? Benjamin Herrenschmidt
  • Re: Latest paulus.git PCI broken on mpc8540? Kumar Gala
  • Re: Latest paulus.git PCI broken on mpc8540? Benjamin Herrenschmidt
  • Re: Latest paulus.git PCI broken on mpc8540? Clemens Koller
  • Re: Latest paulus.git PCI broken on mpc8540? Benjamin Herrenschmidt
  • Re: Latest paulus.git PCI broken on mpc8540? Kumar Gala
• Virtex TEMAC ping -s 10000 host, is it working? alex_snippet
  • Re: Virtex TEMAC ping -s 10000 host, is it working? Lorenz Kolb
  • Re: Virtex TEMAC ping -s 10000 host, is it working? alex_snippet
  • Re: Virtex TEMAC ping -s 10000 host, is it working? Lorenz Kolb
• MPC5200B: Linux does not recognise the external PCI card Juergen Beisert
  • RE: MPC5200B: Linux does not recognise the external PCI card Pedro Luis D. L.
  • Re: MPC5200B: Linux does not recognise the external PCI card Juergen Beisert
  • RE: MPC5200B: Linux does not recognise the external PCI card Pedro Luis D. L.
  • Re: MPC5200B: Linux does not recognise the external PCI card Wolfgang Denk
• Kexec on powerpc marco . stornelli
  • Re: Kexec on powerpc Dale Farnsworth
• /sbin/init: error while loading shared libraries: libm.so.6:cannot open shared object file: No such file or directory [Scanned] Lindner
  • Re: /sbin/init: error while loading shared libraries: libm.so.6:cannot open shared object file: No such file or directory [Scanned] S. Fricke
• Problem with uboot on lite5200 Leo Hendrawan
  • Re: Problem with uboot on lite5200 Wolfgang Denk
  • Re: Problem with uboot on lite5200 Clemens Koller
  • Re: Problem with uboot on lite5200 Wolfgang Denk
  • Re: Problem with uboot on lite5200 Clemens Koller
• about uImage-DENX-v2.6.14 config zhangwei zhang
  • Re: about uImage-DENX-v2.6.14 config Stefan Roese
  • Re: about uImage-DENX-v2.6.14 config Wolfgang Denk
  • Re: about uImage-DENX-v2.6.14 config Robert Schwebel
• Xilinx EMAC Lite driver Petr Žejdl
  • Re: Xilinx EMAC Lite driver Wolfgang Reissnegger
• Virtex TEMAC 1000Mb/s trouble, but 100b/s is working alex_snippet
  • Re: Virtex TEMAC 1000Mb/s trouble, but 100b/s is working schardt
  • Re: Virtex TEMAC 1000Mb/s trouble, but 100b/s is working Lorenz Kolb
  • Re: Virtex TEMAC 1000Mb/s trouble, but 100b/s is working alex_snippet
  • Re: Virtex TEMAC 1000Mb/s trouble, but 100b/s is working g . schardt
  • Re: Virtex TEMAC 1000Mb/s trouble, but 100b/s is working jozsef imrek
  • Re: Virtex TEMAC 1000Mb/s trouble, but 100b/s is working g . schardt
• Xilinx Linux git server Wolfgang Reissnegger
• RE: Linuxppc-embedded Digest, Vol 39, Issue 19 Siva Prasad
• 85xx Device tree problems: e0024520:02 not found robert lazarski
  • Re: 85xx Device tree problems: e0024520:02 not found Clemens Koller
  • Re: 85xx Device tree problems: e0024520:02 not found robert lazarski
  • Re: 85xx Device tree problems: e0024520:02 not found Clemens Koller
  • Re: 85xx Device tree problems: e0024520:02 not found Clemens Koller
  • Re: 85xx Device tree problems: e0024520:02 not found Clemens Koller
  • Re: 85xx Device tree problems: e0024520:02 not found robert lazarski
• inflate returned FFFFFFFB Alan Nishioka
• [PATCH] powerpc: Fix fs_enet module build Jochen Friedrich
  • Re: [PATCH] powerpc: Fix fs_enet module build David Miller
  • Re: [PATCH] powerpc: Fix fs_enet module build Jochen Friedrich
  • Re: [PATCH] powerpc: Fix fs_enet module build David Miller
• [PATCH] powerpc: Add support for PORTA and PORTB odr registers Jochen Friedrich
  • Re: [PATCH] powerpc: Add support for PORTA and PORTB odr registers Scott Wood
• [PATCH v2] [POWERPC] Optimize counting distinct entries in the relocation sections Emil Medve
  • RE: [PATCH v2] [POWERPC] Optimize counting distinct entries in the relocation sections Medve Emilian
  • RE: [PATCH v2] [POWERPC] Optimize counting distinct entries in the relocation sections Medve Emilian
• Re: SDRAM failures on MPC5200B lokowich
  • Re: SDRAM failures on MPC5200B Roman Fietze
  • Re: SDRAM failures on MPC5200B lokowich
• (beginner) Kernel fail during local_irq_enable() fabien
  • Re: (beginner) Kernel fail during local_irq_enable() fabien
  • Re: (beginner) Kernel fail during local_irq_enable() Siva Prasad
• MTD Devices schardt
• Re: [PATCH] Xilinx TEMAC driver John Williams
  • Re: [PATCH] Xilinx TEMAC driver David H. Lynch Jr.
  • RE: [PATCH] Xilinx TEMAC driver Koss, Mike (Mission Systems)
• printk/console_init Siva Prasad
  • Re: printk/console_init Benjamin Herrenschmidt
  • Re: printk/console_init Geert Uytterhoeven
  • RE: printk/console_init - baud rate setting Siva Prasad
  • Re: printk/console_init - baud rate setting Segher Boessenkool
  • RE: printk/console_init - baud rate setting Siva Prasad

• Earlier messages
• Later messages