Hi Jerome,
if the drive ejects the disks always, whether a disc is inserted or
not, then you didn't cut the PIN 9 and PIN 20, that's all.
You do not need to have some parts soldered out, just cut the cable or
the wire on the board of the floppy
TOM from Bavaria
Am 26.02.2006 um 18:05 schrieb Jerome Vernet:
Hi,
So do I... And, not working !!!
First try, simply by cutting wires 9 and 20 on the ribbon (I have some
spare !): the 800k disk eject imediatly the disk.
So I remove the resistor (desolering) on PIN 20, and cut track on the
board for PIN 9. Tested again, the drive still eject the disk
imediatly.
I will check with a voltmeter if the track for PIN 9 is really cutted
(how hard I have to cut ?).
:( :( :(
Jerome
--
LisaList is sponsored by <http://lowendmac.com/> and...
Shop buy.com and save. <http://lowendmac.com/ad/buy.com.html>
Support Low End Mac <http://lowendmac.com/lists/support.html>
LisaList info: <http://lowendmac.com/lists/lisa.html>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:lisalist@mail.maclaunch.com>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/lisalist%40mail.maclaunch.com/>
iPod Accessories for Less
at 1-800-iPOD.COM
Fast Delivery, Low Price, Good Deal
www.1800ipod.com
