Norm of Bandersnatch wrote:
> Ken,
> 
> Your quoted description of the incident did not contain any speed for the
> jet ski, you simply made up the assumption that the jet ski was traveling
> at excessive speed (as well as adding drunk and crazy), in addition you
> just now added "a close or small anchorage or cove" none of which was in
> the original description.
> 

I did have a reason for assuming the jet ski was 
going "too fast", that was the statement that the 
person sustained "severe" head injuries.

I did not state the person was drunk or crazy, 
only indicated that it was my assessment that such 
behavior could easily be explained by such a state 
of condition.

The statement in the article was "secluded" cove, 
I do not think it is a stretch in this case (it 
was not N. Canada) to call such "close or small" 
but that could be incorrect, but if so I think it 
is not germane to the main point.


> The jet ski, as well as any other type of watercraft approaching the
> anchored sailboat, may very well have been moving at a reasonable speed for
> the conditions, or it might have been going too fast, that simply 
was not
> part of the description you originally quoted.  Personally, I would guess
> that if the jet ski t-boned the sailboat at full speed the jet ski driver
> would not have survived. 

I once ran into the back of a cement truck in 
Japan face-first with a bicycle at well over 20 
mph (was doing over 32 when I first applied the 
brakes) and I survived (would have been far worse 
if not for the helmet, and no it was not my fault, 
the driver suddenly turned across me in front of 
me), so I think we cannot make such an assumption 
as that.

But as I said I believe that because he sustained 
"severe" head injuries that indicates he was going 
'too fast'.
Remember it was after sunset (otherwise why argue 
about an anchor light), and if he was unable to 
avoid the boat in a highly agile jet ski or PWC 
after he saw it (or worse yet he did not see it), 
as far as I am concerned that is even more 
compelling evidence he was going "too fast" in the 
dark.
If he had been "off plane" or going slowly he 
could have throttled back or swerved in time.
Plenty of times I have gone through a dark 
anchorage in a dingy and could have hit a dark 
boat (even one with an anchor light on top of the 
mast), but I did not, not even once,  because I 
was not going...too fast!

But who knows, I may be wrong, although I think 
the odds are very much on my side.

  I actually saw a video several years ago of a jet
> ski driver die by hitting his head on the handlebars when jumping a wave.  
> 
> Your assertion that the jet ski was being operated in a reckless manner is
> unfounded by the quoted description, you appear to have simply made that up
> to make your viewpoint seem reasonable.

I did not "assert" but I may have "implied". 
Making assumptions or conditional implications or 
stating opinion is not the same as "making it up".
> 
> You also change your version story with each telling so are what they would
> call a "discredited witness".

Commenting on the story after it I posted it is 
not the same as changing it.
And it is not "my" story to change anyway.
In other words, since I was clearly not the 
source, only the poster, how could it be inferred 
I *could* change it?
> 
> BTW, how much are you selling your gooseneck reading lamps for?

Thanks for asking, 3W power consumption, red/warm 
white = to most 20 W halagons, very wide 140 deg 
beam, can take 30V forever (but won't light above 
15.7V), can take surges or spikes far above that, 
dimmable, 115$ + 7 S&H normally, I will discount 
to you for 100$. -Ken

_______________________________________________
Liveaboard mailing list
[email protected]
To adjust your membership settings over the web 
http://www.liveaboardnow.org/mailman/listinfo/liveaboard
To subscribe send an email to [EMAIL PROTECTED]

To unsubscribe send an email to [EMAIL PROTECTED]
The archives are at http://www.liveaboardnow.org/pipermail/liveaboard/

To search the archives http://www.mail-archive.com/[email protected]

The Mailman Users Guide can be found here 
http://www.gnu.org/software/mailman/mailman-member/index.html

Reply via email to