That is a pretty big pump to get no result. That indicates that your leak is quite large. You should be able to run the pump and throw some dye in the water around your boat and located approximately where your leak is.
Another method could be to buy a large tarp, place it around the offending hull, pump said hull out and tarp should suck right up to hull. Then add water and dye in between hull and tarp. the water pressure will push it through your leak and you will not have diluted dye. Added benefit is that you have a limited amount of water coming in and this may assist in the location being a bit more apparent. On 4/30/2012 16:30, Densler, Vernon R (AS) wrote: > This is the one I bought and tried yesterday and it wasn't enough. > > http://www.harborfreight.com/35-horsepower-dirty-water-pump-with-float-switch-69298.html _______________________________________________ Liveaboard mailing list Liveaboard@liveaboardonline.com To adjust your membership settings over the web http://liveaboardonline.com/mailman/listinfo/liveaboard To subscribe send an email to liveaboard-j...@liveaboardonline.com To unsubscribe send an email to liveaboard-le...@liveaboardonline.com The archives are at http://www.liveaboardonline.com/pipermail/liveaboard/ To search the archives http://www.mail-archive.com/liveaboard@liveaboardnow.org The Mailman Users Guide can be found here http://www.gnu.org/software/mailman/mailman-member/index.html