This is interesting to me, single board pcs. Is ther a single board pc out there that supports netbooting (PXE or Ether). Wouldnt it be cool to hang the terminal on the side of the monitor! Or even attach it to the back of a desk? Smaller is better!
Arthur H. Johnson II [EMAIL PROTECTED] The Linux Box http://www.linuxbox.nu On 5 Jan 2002, Dario Rapisardi wrote: > Hi Henry, > > I really never tried such underclocking thing, but if you want a fanless > workstation, then you should consider a SBC (Single Board Computer). For > example, I recently got the AAEON Gene-4310, which has a NS-GEODE 200mhz > MMX CPU, all in a 5.25" motherboard. Really cool. It uses only 5V DC, so > if you are a little capable with electricity stuff, then you can use an > AC-DC adaptor as the power supply. This leaves you a fanless, quiet and > very small workstation. > > Hope it helps, > > Dario. > > > El sáb, 05-01-2002 a las 20:33, Henry House escribió: > > This is a bit off-topic, but this seems like the best place to ask, so here > > goes. > > > > I want to built a fanless computer to use as a diskless client. Recent AMD > > CPUs are out of the question because of their prodigious heat production. So > > I plan to use an 800Mhz Pentium III underclocked to 400Mhz. Can anyone judge > > whether the CPU would run cool enough at this speed with only a passive heat > > sink to avoid burning up? > > > > -- > > Henry House > > The attached file is a digital signature. See <http://romana.hajhouse.org/pgp> > > for information. My OpenPGP key: <http://romana.hajhouse.org/hajhouse.asc>. > > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
