Mmmmm.... I just know the Gene 4310, and it doesn't have anything of that. But you can almost always burn the etherboot code in BIOS.
Regards, Dario. El mar, 08-01-2002 a las 13:23, Arthur H. Johnson II escribió: > > This is interesting to me, single board pcs. Is ther a single board pc > out there that supports netbooting (PXE or Ether). Wouldnt it be cool to > hang the terminal on the side of the monitor! Or even attach it to the > back of a desk? Smaller is better! > > Arthur H. Johnson II > [EMAIL PROTECTED] > The Linux Box > http://www.linuxbox.nu > > On 5 Jan 2002, Dario Rapisardi wrote: > > > Hi Henry, > > > > I really never tried such underclocking thing, but if you want a fanless > > workstation, then you should consider a SBC (Single Board Computer). For > > example, I recently got the AAEON Gene-4310, which has a NS-GEODE 200mhz > > MMX CPU, all in a 5.25" motherboard. Really cool. It uses only 5V DC, so > > if you are a little capable with electricity stuff, then you can use an > > AC-DC adaptor as the power supply. This leaves you a fanless, quiet and > > very small workstation. > > > > Hope it helps, > > > > Dario. > > > > > > El sáb, 05-01-2002 a las 20:33, Henry House escribió: > > > This is a bit off-topic, but this seems like the best place to ask, so here > > > goes. > > > > > > I want to built a fanless computer to use as a diskless client. Recent AMD > > > CPUs are out of the question because of their prodigious heat production. So > > > I plan to use an 800Mhz Pentium III underclocked to 400Mhz. Can anyone judge > > > whether the CPU would run cool enough at this speed with only a passive heat > > > sink to avoid burning up? > > > > > > -- > > > Henry House > > > The attached file is a digital signature. See <http://romana.hajhouse.org/pgp> > > > for information. My OpenPGP key: <http://romana.hajhouse.org/hajhouse.asc>. > > > > > > > > _____________________________________________________________________ > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
